Applications:  

The N probes measure the thickness of non-conductive coatings on non-magnetic metals. It is used on anodizing, varnish, paint, enamel, plastic coatings, powder, etc. applied to aluminum, brass, non-magnetic stainless steel, etc.

* Specially for the thickness measurement of coating on small workpiece.

* Measuring methods:  eddy current (N).
* Two measurement mode: Single and Continuous(Notice: Continuous mode is convenient to measure the
coating thickness of curved objects and tiny objects.)
* Metric/imperial system selectable.

* Manual or automatic shut down.

* Automatic memory of calibration value,and automatic recognize the substrate.
* Operation process have buzzing reminder,while no buzzing in continuous mode.
* Use " USB data output" and " RS-232 data output" to connect with PC.

* Provide " Bluetooth data output" choice.

* Separate Type, measurements can be more flexibility. 

Operating Principle   Eddy Current (NF) 

  Measuring Range   0~200 um / 0~8 mil 

  Resolution   0.1 um 

  Min. Radius Workpiece   convex 2 mm / concave 4 mm 

  Min. Measuring Area   2 mm 

  Min. Sample Thickness   0.1 mm 

  Accuracy   ± 1~3%n or ± 2.5 um  

  Auto Power Off   

  Metric / Imperial   Convertible 

  Battery Indicator   Low Battery Indicator 

  Operating Conditions   Temp. 0~40 °C, Humidity: 10~90 %RH 

  Power Supply   4 x 1.5 V AAA (UM-4) Battery 

  Dimensions   140 x 72 x 34 mm ( 5.5 x 2.8 x 1.3 inch ) 

  Weight   215 g (Not Including Batteries) 

Standard Accessories:

 1. Main Unit

 2. Probe (NF Type)

 3. Calibration Base Set (NF Type) CTG-BS

 4. Calibration Foils CTG-CF (1 set, 4 pieces)

 5. Carrying Case

 6. Operation Manual

Optional accessories:

 1. USB, RS-232C data cable with software
 2. Bluetooth data out put with software