DUKEMEN has designed new model machines especially for U(C)PVC fittings which meet strictly requirements from customers.
* wide safety doors are fit for the core pulling cylinder of fittings moulds.
* Two groups core pulling devices, 2in & 2 out for each group.
* Hard chroming nozzle with bigger nozzle hole ensures high quality of products of U(C)PVC.
* With corrosion resistance, hard chroming special screw for the PVC powders can plasticize U(C)PVC powders evenly.
* Multi-Stage air-cooling ensures exact temperature control necessary for U(C)PVC which has narrow melt range.
* The increased hydraulic motor meets the requirements of high torque when PVC powders plasticized.
* Driven by the servomotor or variable pump in order to save energy.
* wide safety doors are fit for the core pulling cylinder of fittings moulds.
* Two groups core pulling devices, 2in & 2 out for each group.
* Hard chroming nozzle with bigger nozzle hole ensures high quality of products of U(C)PVC.
* With corrosion resistance, hard chroming special screw for the PVC powders can plasticize U(C)PVC powders evenly.
* Multi-Stage air-cooling ensures exact temperature control necessary for U(C)PVC which has narrow melt range.
* The increased hydraulic motor meets the requirements of high torque when PVC powders plasticized.
* Driven by the servomotor or variable pump in order to save energy.
ITEMS | UNIT | DKM-100PVC | |||
A | B | C | |||
INECTION UNIT | Screw Diameter | mm | 35 | 38 | 42 |
Screw L/D Ratio | 21.7 | 20.0 | 18.1 | ||
Shot Size(Theoretical) | cm3 | 158 | 186 | 227 | |
Injection Weight(UPVC) | g | 205 | 242 | 295 | |
Injection Rate Into Air | cm3/s | 84 | 99 | 121 | |
Injection Pressure | bar | 1939 | 1645 | 1347 | |
Injection Stroke | mm | 164 | |||
Screw Speed | rpm | 0~187 | |||
CLAMPING UNIT | Clamping Force | KN | 1000 | ||
Clamping Stroke | mm | 320 | |||
Space Between Tie Bar | mm | 360×360 | |||
Max. Mold Height | mm | 350 | |||
Min. Mold Height | mm | 100 | |||
Eject Stroke/Eject Force | mm/KN | 100/38 | |||
No. Of Ejector Pins | piece | 5 | |||
OTHERS | Max. Pump Pressure | MPa | 16 | ||
Pump Motor Power | KW | 11.0 | |||
Heater Power | KW | 4.6 | |||
Hopper Capacity | Kg | 25 | |||
Oil Tank Capacity | L | 180 | |||
Machine Dimension(L×W×H) | m | 4.1×1.1×1.8 | |||
Machine Weight | T | 3.5 |