High Efficiency Solution:

Model Number: YS-ELD3000B-A

With the technology of diode pump, air cooler, engraving speed of 3000dot/sec and max engraving size at ellipse170*140*100mm, ELD3000B-A can finish engraving within 1mins for a 3D model of 180,000dots, is quite suitable to run in the shopping mall or tourism place to make 3D and 2D image crystal gift on spot, receive big orders and fulfill most of the requirement from the customer. ELD3000B is also very suitable for satellite business, which means you can put several sets of the 3D Camera in different place, receive orders and send the data for engraving via internet.

 

 Technical Specification:

(1) Laser Medium: Diode (DPSSL-Q Switch)

(2) Laser Wavelength: 532nm

(3) Maximum Engraving frequency: 4KHZ

(4) Laser Source: 1

(5) Resolution: 500dpi-800dpi

(6) Engraving Dimension: Max Ellipse170×140×100mm (by one time engraving)

(7) Max Engraving speed: 180,000dots/min (3000dots/sec)

(8) Typical engraving time: 50*50*80mm crystal---120K points 3d portrait< 50secs

(9) Input Power standard: 220V/ 110V, 50HZ

(10) Working Consumption of Electricity: 0.6KW

(11) Dimension of The Mainframe: L570mm×W780mm×H1000mm (big)

                                                 L760mm×W560mm×H560mm (small)

(12) Weight: 110KG (big), 75kg (small)

(13) Cooling system: air cooler

(14) Appearance: two options

(15) Warranty for the laser diode: 8000hrs (not exceed one year)

(16) Mass production: No