The MAXMAUV CTP Plate is a specially designed CTP plate with a high UV sensitive emulsion coating that makes it suitable for UV CTP platesetters.
By boosting and broadening the sensitivity of the coating emulsion and by modifying the substrate graining architecture, the MAXMA UV CTP Plate runs fast and excellently on the world’s leading brands UV CTP platesetters.
- Durable top surface
- Special rubber compound has high resistance to swelling caused
- by printing agents based in mineral or vegetable oils
- Minimum thickness tolerance
- High smash life
- High and precise resilience due to special process
- High ink transfer
- Reduces lining
Plate type
- Positive-working UV CTP plate with optional post-bake for longer runs
- Applications: For both sheetfed and web offset presses.
- Substrate: Electrochemical-grained and anodized aluminum substrate.
- Thickness: 0.15, 0.20, 0.25, 0.30, and 0.40
- Shelf life: 18 months
Imaging
- Safelight: Handling under UV-free yellow safelight.
- Spectral sensitivity: 360 - 420nm (peak at 395nm)
- Required imaging energy: 50mJ/cm2
- Resolution: 1 - 99% at 250lpi
- FM capability: Stochastic 10 micron
Processing
- Developer: Maxma DP-6 (recommended) or popular alternatives.
- Developer dilution: 1:3 - 1:8 (1:4 recommended).
- Replenishing rate: 60ml/m2
- Processing temperature: 25 - 27 degrees Celsius
- Processing dwell time: 35 - 25 seconds
On-press
- Run length: 150,000 runs (unbaked) and above 1,000,000 runs (baked)
- Plate baking: 220 degrees Celsius for 5 minutes