ATUREX Resin factory can supply all grade resin hardners.
We can supply you modified grade resin. Such as:
1. Polyamides (Adducts/Ketimines)/Amidoamine
2. Modified Aliphatic Amines
3. Modified Cycloaliphatic Amines (Adducts)
4. Waterborne Hardeners/Latent Hardener
5. Epoxy Modifiers (Accelerator/Thickener/Diluent)
6. Modified Aromatic/Aliphatic Amines

Principal properties:						Principal applications:
- Polyamides offer low toxicity, good flexibility and toughness, long pot life and good water/corrosion resistance.						- Polyamides (adducts) find use in solvent-based, two component coatings (e.g., primers and finishes), coal tar epoxy coatings, adhesives, putties, sealants, cable jointing and electrical encapsulation.
- Polyamide adducts provide good compatibility (without induction period) and better cure under adverse conditions than standard polyamides.						- Ketimine polyamides mostly are applied to cationic electro-deposition coating systems, also used for one-pack epoxy composites.
- Ketimine polyamides are similar to the performance of standard polyamides, and have better cure under high humid conditions and longer pot life.						- Amidoamine usually is applied to civil engineering (e.g., concrete bonding, crack injection, flooring, tile grouts, etc.), solvent-free/high-solids coatings, adhesives, electrical encapsulation and wet lay-up laminating.
- Amidoamine exhibits low viscosity, very good adhesion (particularly to concrete and damp substrates) and good cure under humid conditions.

 

Epoxy Hardener	Type	Viscosity   (mPa·s/25°C)	Amine Value	Color	Specific Gravity	Solids	AHEW	Use Level	Gel Time	Thin Film Set Time (hr/25°C)	Typical Cure Schedule	PDF
			(mg KOH/g)	(Gardner)	(25°C)	(%)		(phr)	(min/150g, 25°C)
ATUREX 335	Modified Polyamide	150-350	420-460	<18	1.02	-	75	40	40	7.0	2-7 days at ambient
ATUREX 335CA	Modified Polyamide	800-1800	410-450	<18	0.98	-	75	40	35	6.0	2-7 days at ambient
ATUREX 375	Polyamide Amine	25000-45000	280-320	<12	0.98	-	125	65	200	10.0	2-7 days at ambient
ATUREX 400	Polyamide Amine	8000-14000	380-420	<12	0.98	-	100	55	180	11.0	2-7 days at ambient
ATUREX 400L	Polyamide Amine	2000-4000	380-400	<12	0.98	-	95	50	150	12.0	2-7 days at ambient
ATUREX 440	Amidoamine	300-700	360-400	<12	0.95	-	95	50	120	10.0	2-7 days at ambient
ATUREX 450	Polyamide Amine	25000-45000	280-320	<12	0.99	-	125	65	200	10.0	2-7 days at ambient
ATUREX 460	Polyamide Amine	50000-70000(40°C)	180-220	<12	0.99	-	200	105	300	N/A	2-7 days at ambient
ATUREX 460X70	Polyamide Amine	800-1800	120-160	<12	0.94	68-72	286	150	N/A	N/A	2-7 days at ambient
ATUREX 485IT50	Polyamide Amine Adduct	70-200	130-170	<12	0.94	48-52	270	140	N/A	2.0/Solid Resin	2-7 days at ambient
ATUREX 495	Ketimine Polyamide Amine	15000-30000	240-260	<12	0.98	-	-	-	N/A	N/A	2-7 days at ambient
ATUREX 540	Polyamide Amine	50000-70000(40°C)	180-220	<12	0.99	-	182	100	300	N/A	2-7 days at ambient
ATUREX 540X70	Polyamide Amine	700-1500	120-160	<12	0.94	68-72	260	135	N/A	N/A	2-7 days at ambient
ATUREX 585IT60	Polyamide Amine Adduct	800-1500	120-140	<12	0.95	58-62	317	167	N/A	N/A	2-7 days at ambient
ATUREX 605	Polyamide Amine	300-1000(185°C)	90-110	<12	0.99	-	480	250	N/A	N/A	2-7 days at ambient
ATUREX 605X60	Polyamide Amine	2000-4000	50-70	<12	0.93	58-62	800	420	N/A	N/A	2-7 days at ambient
ATUREX 620BC70	Ketimine Polyamide Amine	9500-12500	60-70	<12	0.95	68-72	-	-	N/A	N/A	2-7 days at ambient
ATUREX 650	Polyamide Amine Adduct	1000-3000	205-245	<12	1.00	-	150	70	110	8.0	2-7 days at ambient
ATUREX 740	Polyamide Amine Adduct	3000-5000	205-245	<12	1.02	-	150	70	100	7.0	2-7 days at ambient