Computers from the NPE family is the series of industrial built-in computers, characterized by: complete, ready platform (hardware + installed Linux operating system + freeware tools and programming libraries for C/C++), adapted to the operation in difficult environment conditions (temperature range even form -20°C to 70°C) and high operational reliability.
Specification
System
CPU - ARM9 32-bit RISC CPU, 180 MHz, 200 MIPS
Memory on board - 64 MB SDRAM (max memory size 128 MB)
Flash memory - 1GB
Card reader - 1 x SD
System - Operating system Linux v 2.6
RTC clock - RTC, SRAM 240 bajtów, Watch Dog Timer
On Board LAN
1 x Ethernet 10/100 Mbps (RJ45 connector); 1.5 KV magnetic isolation
COM Ports
Interface RS-232 - 2 x RS-232, built in protection 15 KV ESD
Interface RS-485 - 1 x RS-485, built in protection 15 KV ESD; Data bits: 5, 6, 7, 8, Stop bits: 1, 1.5, 2; Parity: None, Even, Odd, Space, Mark, Speed: 50 bps to 921.6 Kbps
LED controls, Keyboard, I/O
LED signalling - system x 1, user x 1
Ethernet signalling - LED link, LED 100Mbit (integrated with RJ45 connector)
Selector - 1 x Switch (access from the front panel)
GPIO - 8 x DI
Diagnostic socket - 1x 6 pin socket
Power Requirements
Direct current - 12 ~ 36 V (optionally 12 ~ 48 Vdc – telecommunication range)
Power draft - 7W max
Dimensions and Weight
Dimensions - (width x depth x height) 35 x 120 x 101 mm
Weight - 300g
Casing - ABS, DIN mounting
Storage and working conditions
Working parameters - Operation temperature: -10 ~ 60°C; Wetness: 5 ~ 95% RH (without condensation); Optionally: -40 to 75°C (for NPE-9100-E).
Storage parameters - Storage temperature: -20 ~ 80°C; Wetness: 5 ~ 95% RH (without condensation); Optionally: -40 to 85° C (for NPE-9100-E)
Aditional parameters of offered model
Analog inputs - 4 x AI: 0..10V DC
Modem - GSM/GPRS/EDGE Waveband GSM/GPRS/EGPRS 900/1800/1900 MHz; GPRS/EDGE Class 10 max. 236.8 kbps (downlink); Compatible with GSM phase 2/2+.; Class 4 (2W @ 900 MHz).; Class 1 (1W @1800/1900 MHz); Antenna connector: SMA (female)
Aditional power draft - 5W max
Aditional weight - 50g
Specification
System
CPU - ARM9 32-bit RISC CPU, 180 MHz, 200 MIPS
Memory on board - 64 MB SDRAM (max memory size 128 MB)
Flash memory - 1GB
Card reader - 1 x SD
System - Operating system Linux v 2.6
RTC clock - RTC, SRAM 240 bajtów, Watch Dog Timer
On Board LAN
1 x Ethernet 10/100 Mbps (RJ45 connector); 1.5 KV magnetic isolation
COM Ports
Interface RS-232 - 2 x RS-232, built in protection 15 KV ESD
Interface RS-485 - 1 x RS-485, built in protection 15 KV ESD; Data bits: 5, 6, 7, 8, Stop bits: 1, 1.5, 2; Parity: None, Even, Odd, Space, Mark, Speed: 50 bps to 921.6 Kbps
LED controls, Keyboard, I/O
LED signalling - system x 1, user x 1
Ethernet signalling - LED link, LED 100Mbit (integrated with RJ45 connector)
Selector - 1 x Switch (access from the front panel)
GPIO - 8 x DI
Diagnostic socket - 1x 6 pin socket
Power Requirements
Direct current - 12 ~ 36 V (optionally 12 ~ 48 Vdc – telecommunication range)
Power draft - 7W max
Dimensions and Weight
Dimensions - (width x depth x height) 35 x 120 x 101 mm
Weight - 300g
Casing - ABS, DIN mounting
Storage and working conditions
Working parameters - Operation temperature: -10 ~ 60°C; Wetness: 5 ~ 95% RH (without condensation); Optionally: -40 to 75°C (for NPE-9100-E).
Storage parameters - Storage temperature: -20 ~ 80°C; Wetness: 5 ~ 95% RH (without condensation); Optionally: -40 to 85° C (for NPE-9100-E)
Aditional parameters of offered model
Analog inputs - 4 x AI: 0..10V DC
Modem - GSM/GPRS/EDGE Waveband GSM/GPRS/EGPRS 900/1800/1900 MHz; GPRS/EDGE Class 10 max. 236.8 kbps (downlink); Compatible with GSM phase 2/2+.; Class 4 (2W @ 900 MHz).; Class 1 (1W @1800/1900 MHz); Antenna connector: SMA (female)
Aditional power draft - 5W max
Aditional weight - 50g