TRM 212 - Danfoss ECL200/300 CONVERTER, MBUS, ETHERNET
TRM 212 is a device that allows you to communicate through Ethernet network (Intranet / Internet) with weather inclement controls Danfoss ECL 200 / 300, thermal energy counters and additional inputs - outputs modules. Depending on configuration module is capable of supporting weather regulator, up to 6 energy counter and to 10 additional modules of additional inputs - outputs.
Converters TRM202 and TRM212 are additionally equipped with GSM modem. Besides standard Ethernet communication, it allows for communication of converters through the GPRS. For GPRS communication SIM card of any GSM operator is required, allowing for modem logging in public or private APN.
Features:
- Communication with Danfoss ECL200/300 in service protocol
- Communication with counters in the Mbus
- Extend additional input - output
- A graphical presentation of data by www
- Standardizing communication protocol Modbus TCP
- Registration data in mass storage
- Sharing data in CSV for MS Excell
- Supply: 12 ~ 36 Vdc
Most important features of TRM 212 graphical visualization processes node radiant, logging parameters work node, record emergency situation, the ability to advise States emergency by sending email (easily replaced also SMS), sharing the data collected for the spreadsheet Excell, remote control parameter of weather regulator and remote control of pomps installed on the node, all these features are available from the Internet Explorer.
Communication with Danfoss ECL200/300 in service protocol, and with meters in MBus protocol.
In TRM2x2 both types of communication: through GPRS and Ethernet are realized independently, which allows user of telemetrical system to use freely offered communication methods, deciding to use one of those technologies or both of them at the same time. It is also possible to use one technology, e.g. Ethernet, as the basic communication channel, and GPRS is used as emergency channel.
TRM converters resources may be expanded in two ways:
1. By additional inputs-outputs or communication ports, built in TRM converter
2. By additional external input-output modules (TRM-7000 series), connected to TRM converter through RS485 communication port.