Rubber sheeting mill is chiefly used as accessory of internal mixers to make rubber sheets. The rollers are made of chilled cast iron with vanadium and titanium alloys. The roller face is hard and anti-wear. The internal cavity is processed to make temperature well proportioned on the roll surface. The machine is equipped with an overload protection device to prevent the major components from being damaged due to overloading. The machine is also equipped with an emergency device. When an emergency accident happens, just draw the pull rod, and the machine will stop immediately. It is safe and reliable. The transmission system adopts a hard facing gear reducer, which has a compacted structure with higher transmission effciency, lower noise and longer service life. The base frame is a complete framework, which is convenient for installation. NOTE: all the models may be optionally equipped with either copper bushes or rolling bearings. Model XKY-550 XKY-660 XKY-710 1,Working diameter of rolls mm 550 660 710 2,Working length of rolls mm 1500 2130 2200 3,Working linear speed of front roll m/min 31.17 22-7 30.26 4,Friction ratio of front and rear roll 1:1.09 1-24 1:1.51 5,Capacity per batch (mix-up stock) kg 540kg/h 165 190 6,Driven motor power kw 110 180 280 7,Overall dimensions mm L 5870 5900 7650 9120 W 2420 3460 3850 H 2562 2535 2720 2930 8,Weight t ~28 ~49 ~59