Alkaline Battery LR6/AA 1.5V Dry Battery Modic-max Brand for Test Meter
A. Alkaline Battery LR6/AA 1.5V Dry Battery
B. D.G Brand, OEM Brand availble,
C. Shrink packing with gift box
D. Super High Capacity and Competitive Price
E. Mercury and cadmium free
For TV-Remote Control, clock, test meter, alarm clock, etc.
Famous Brand, High Quality and Fast Respond
1. Scope
This specification defines the technical requirements for LR6 alkaline battery.
Cross References: ATC IEC JIS GB (CHINA)
LR6 LR6 AM-3 LR6
2. Purpose
To assure that any LR6 battery manufactured or procured by YongGao will meet or
exceed our customers expectations.
3. Reference Document
IEC 60086-1:2000 …Primary Batteries-Part1:General
IEC 60086-2:2000 …Primary Batteries-Part2:Physical and Electrical Specification
GB/T 7112-1998 …Zinc-Manganese Dry Batteries of R03, R1, R6, R14and R20
Alkaline Zinc-Manganese Dry Batteries of LR03, LR1, LR6, LR14and LR20
4. Chemical System
Alkaline Zinc-Manganese Dioxide (KOH Electrolyte)
MERCURY AND CADMIUM ARE NOT ADDED IN BATTERY .
5. Nominal Voltage: 1.5volt
6. Weight: approximate 22.5g
7. Jacket: Foil Label
8. Nominal Capacity
1900mah (Conditions: 10Ωdischarge 1hours per day at 20±2℃, end point voltage 0.9v)
9. Electrical Characteristics
|
Off-load |
On-load |
Short circuit |
Acceptance Standard |
|
|
Initialwithin30 days |
1.58 |
1.5 |
7 |
GB2828 commonlyⅠsampling |
|
After 12months |
1.55 |
1.45 |
7 |
conditions: 3.9Ω±0.5% load resistance, measuring time 0.3 seconds, temperature at 20±2℃,
the hairspring type ampere meter with ±0.5% accuracy (0.5level) shall be used.
10. Service Time (condition: test temp. 20±2℃, tested within 30 days after delivery)
|
Discharge Condition |
IEC |
Average Minimum Discharge Time |
|||
|
Discharge |
Daily |
End Point |
Initial |
After 12mth at |
|
|
43Ω |
4h |
0.9 |
60h |
82h |
77h |
|
3.9Ω |
1h |
0.9 |
4.0h |
6.5h |
1h |
|
10Ω |
1h |
0.9 |
11.0h |
16.8h |
15.5h |
|
1.8/Ω |
15sec/min |
0.9 |
320cycles |
530cycles |
470cycles |
|
10Ω |
24h |
0.9 |
/ |
17.5h |
16.5h |