High Heat Transfer Efficiency 316 AISI Stainless Steel Plates Flat Plate Heat Exchangers

Working principles

The heating surface consists of thin corrugated metal plates stacked on top of each other. Channels are formed between

the plates and corner ports are arranged so that the two media flow through alternate channels, always in counter-current

flow. The media are kept in the unit by a brazed seal around the edge of the plates. The contact points of the plates are also

brazed to withstand the pressure of the media handled.
 

Standard design

The plate pack is covered by cover plates. Connections are located in the front or rear cover plate. The channel plates are

corrugated to improve heat transfer efficiency and to make them rigid.
 

Standard materials

Cover plates: Stainless steel AISI 316

Connections: Stainless steel AISI 316

Plates: Stainless steel AISI 316

Brazing material: Copper
 

Particulars required for quotation

To enable Baode's representative to make a specific quotation, enquiries should be accompanied by the following particulars:

– flow rates or heat load required

– temperature program

– physical properties of liquids in question

– desired working pressure

– maximum permitted pressure drop
 

Advantages of brazed plate heat exchangers in Industry and HVAC&R

The Baode Brazed plate heat exchangers (BHE) have several advantages over traditional heat exchangers in Industrial and

HVAC&R applications.

– The high heat transfer efficiency of the BHE makes it extremely compact and also easy to install in places were space is limited.

– The unit has no gaskets and is therefore suitable in applications were temperature and/or pressure is high e.g. in district heating.

– The Baode supply system reassures that, no matter were you are on the globe, the BHE units are available with a very short

delivery time.

 

Refrigeration Systems :

Evaporator ,

Condenser,

Economizers and Desuperheaters

Air dryer

Heat pump

Absorption chiller
 

HVAC

Radiant Floor,

Snow Melt,

Boiler and

Solar water heat exchanger

District heating
 

Other Industrial applications such as:

Heat Recovery and

Oil Cooler: hydraulic oil cooling, engine oil cooling, and fuel oil heating.

Steam Heating.

Flat plate heat exchanger

Beer wort cooler

Milk pasteurization

Wind turbine oil cooler

Marine oil cooler


Short delivery time.

High quality

Reasonable price

Customer made

Know-how design and customer support

 

Width	Height	Horizontal  port  distance	Vertical  port  distance	Thickness	Max Plates	Max flowrate  (M3/h)	Weight  (kg)	Heat  exchange  area (m2)	Volume L
246	528	174	456	13+2.46N	200	42	7.2+0.52N	0.12 (N-2)	0.196 (N-2)