Rubber sheeting mill is chiefly used as accessory of internal mixers to make rubber sheets. The rollers are made of chilled cast iron with vanadium and titanium alloys. The roller face is hard and anti-wear. The internal cavity is processed to make temperature well proportioned on the roll surface. The machine is equipped with an overload protection device to prevent the major components from being damaged due to overloading. The machine is also equipped with an emergency device. When an emergency accident happens, just draw the pull rod, and the machine will stop immediately. It is safe and reliable. The transmission system adopts a hard facing gear reducer, which has a compacted structure with higher transmission effciency, lower noise and longer service life. The base frame is a complete framework, which is convenient for installation. NOTE: all the models may be optionally equipped with either copper bushes or rolling bearings. Model XKY-550 XKY-660 XKY-710 Item Roll diameter mm 550 660 710 Roll working length mm 1500 2130 2200 Linear speed of front roll m/min 31.17 32 30.26 Speed ratio of rolls   01:01.1 01:01.1 01:01.1 Compound feeding capacity kg 140 165 190 Motor power kW 110 240 280 Dimensions L mm 6210 7650 9120 W mm 2630 3460 3850 H mm 2900 2720 2930 Gross weight t ~28 ~53 ~59