1 Summary function
Working Based on existing GSM/GPRS network and GPS satellites, this product can locate and monitor any remote targets by SMS or GPRS.
1.1 Positioning and Tracking: Through the on-line Positioning Platform or the cell phone to locates at times, and get the working status. You can choose the Positioning Platform by yourself.
1.2 Triggering Emergency Alarm: When there is a emergency happened on the vehicle, you can put on the button and the installed unit will send out alarm to the authorized numbers.
1.3 Remote controlling oil and circuit: you can control the oil and circuit via the unit by SMS in anywhere and anytime.
1.4 Remote Monitoring: In anywhere and anytime, call the phone number in the unit, when it connects, you can monitor the sound around 5 meter.
1.5 Movement Alert: Send SMS to the unit to start the movement alert function. When the vehicle is moving, the unit will send the movement alert to all authorized numbers.
1.6 Overspeed Alert: Send SMS to the unit to start the movement alert function. When the vehicle is overspeed, the unit will send the overspeed alert to all authorized numbers.
1.7 Geo-fence: Set up a geo-fence for the unit to restrict its movements within a district. The unit will send the message to all authorized numbers when it breaches the district.
1.8 the unit: send SMS to resume the default of unit.
1.9 Auto Track: You can set up auto track by SMS or on-line positioning platform.
1.10 Mileage statistics; ACC checking; cutting off power and alarm.
1.11 Compatible with the original anti-theft alarm: It will send SMS alarm after the original anti-theft alarm warning.
1.12 Modify the IP and Port of Communication Protocol for different on-line positioning platform
2 Application
l Vehicle rental / Fleet management etc
l Protect wealth etc
l Provide peace-of-mind for businessmen
l Manage personnel
3 Hardware Description
3.1 Front face 3.2 Rear face
3.3 Side face
3.4 Bottom face
4.Specs.
Content |
Specs. |
Dim. |
85mm x 63mm x 25mm(3.3”*2.5”*0.98”) |
Weight |
160g |
Network |
GSM/GPRS/GPS |
Band |
850/1800/1900Mhz or 900/1800/1900Mhz or 850/900/1800/1900 |
GPS chip |
SIRF3 chip |
GSM/GPRS module |
Simcom300 or Simcom340 |
GPS sensitivity |
-159dBm |
GPS accuracy |
5m |
Time To First Fix |
Cold status 45s Warm status 35s Hot status 1s |
Work voltage |
12V—24V |
Battery |
Chargeable changeable 3.7V 860mAh Li-ion battery |
Standby |
48hours |
Storage Temp. |
-40°C to +85°C |
Operation Temp. |
-20°C to +55°C |
Humidity |
5%--95% non-condensing |
Work current |
120MA DC12V |
Support |
AGPS |
GPS Channal |
24channals |
Memory |
Use the sd card support 1M-8G |
Controller current |
5V |
5 Usage
5.1 SIM card installation
Make sure that there is no call transfer and call display is on, and PIN code off. The SMS message must in Text format, can’t be identified for PDU format.
5.1.1 Put SIM card into card box.
5.1.2 Put the card box into host as picture.
5.2 GPS Vehicle Tracker Installation
GPS/GSM/GPRS tracker should be installed by technical professional of local service centre. Without
permission, the user can’t repair and move the tracker randomly. If users do, any unfortunate damage should be compensated by himself.
5.2.1 Install Wire Box
5.2.2 GPS Vehicle Tracker Installation
10 |
9 |
8 |
7 |
6 |
5 |
4 |
3 |
2 |
1 |
1 |
12 |
13 |
14 |
15 |
16 |
17 |
18 |
19 |
20 |
1. Grey wire SPEAKING
2.
3. yellow wire OIL CONTROL
4. White wire ELECTRICITY CONTROL
5.
6.orange wire GPS_TX232
7.blue wire SOS+
8.purple wire SOS-
9.green ACC
10.red wire POWER POSITIVE
11.black wire GND
12.blue with black SHAKE ALARM
13.purple with white wire MEASURE OIL
14.pink wire VEHICLE ALARM
15.White with black wire Controller current 5V
16.Grey with black wire RX(receive)
17.yellow with red wire TX(send)
18.black wire GND
19.green with black wire AGND(MIC)
20.Coffee wire MIC PHONE
Installation steps (caution: the following installation should under no power, otherwise will be dangerous)
5.3 Startup
5.3.1 Installed the tracker in the car, then put the SIM card into the tracker host outdoors.
5.3.2 For first use, please initialize the unit and restore it to default setting.( please refer to 5.4 for instruction.)
5.3.3 or 40 seconds, the unit will begin to work and acquire the GSM signals as well as the GPS signals, and the red indicator will keep flashing every 2 seconds when the GPS module is in standby mode. When the blue indicator is keep shine, the unit has been located.
5.3.4 When this unit receives GPS signals normally, you can use it and do all the following settings.
5.4 Initialization
Send “begin+password” in SMS to the unit, it will reply “begin ok” and initialize all the settings. (Default password: 123456)
5.5 Change the password
5.5.1 Send SMS "password+old password+space+new password" password to change the password.
Remark: Make sure the new password is in 6 digits, or else the tracker can not recognize the password.
5.5.2 you can Send "resume+space+password+new password" to the tracker, to restore the original setting in case of losing the new password, and it will reply resume password, pass word is 123456
5.6 Authorization
There are only 5 numbers able to be authorized.
5.6.1 Call the tracker for 10 times, it will make the cell phone number as the authorized number automatically.
5.6.2 Send SMS "admin+password+space+cell phone number" to set up a authorized number. The other authorized numbers should be set by the first authorized number. If the number is successfully authorized, the unit will reply "add admin number ok!" in SMS.
5.6.3 Send SMS "noadmin+password+space+authorized number" to delete the authorized number. If the number is successfully authorized, the unit will reply "cancel admin number ok!" in SMS.If not delete the inexistent authorized number will return cancel admin number fail
5.6.4 For roaming purpose, you have to add your country code ahead of the cell phone number, for example, please "send admin123456 008613311113333" to tracker to set 13311113333 as an authorized number.
5.7 Cell phone Real-time polling
5.7.1 send "obtain+password", it will report a Geo-info; Or call the tracker under track mode, it will reply Geo-information, Geo-informaiton:
" lat:22.559791 long:113.975802 Speed:000.00 09/11/11 12:57 gps tracker bat:50% signal:A imei: 356895030630472"
5.8 Auto Track
5.8.1 Set up: Send SMS "at030s015n+space+password " to the unit, it will reply "set auto track ok" (it will report the Geo-info at 30s intervals for 15 times, s:second, m: minute, h: hour, times and time must be three digits)
5.8.2 Send SMS "at030s***n+space+password" to the unit, it will reply"set auto track ok" and will send SMS heaps of times.
5.8.3 Cancel: Send "noat+password" to delete the “auto track”.
5.9 Remote control oil and circuit
5.9.1 Control oil
Send SMS "stopoil+password" to control oil. For example send SMS:stopoil123456
To supply the oil again, send SMS "supplyoil+password" to the unit.
5.9.2 Control circuit
Send SMS "stopelec+password" to control circuit. For example send SMS: stopelec123456
To supply the circuit again, send SMS "supplyelec+password" to the unit.
If there is no authorized number, all number can control. If there is already an authorized number, only the authorized number can control.
5.10 Modes switch between "tracker" and "monitor"
5.10.1 The default mode is "tracker".
5.10.2 Send SMS "monitor+password" to the unit, and it will reply “monitor ok!” and switch to “monitor”mode.
5.10.3 Send SMS "tracker+password" to the unit, it will reply “tracker ok!” and restore to “track” mode.
5.11 Geo-fence
Set up a geo-fence for the unit to restrict its movements within a district. The unit will send the message to the authorized numbers when it breaches the district.
5.11.1 Set up: When the unit stays immobile in a place for 3-10 minutes, the user can Send SMS "stockade+password+space+longitude, latitude;longitude, latitude" to unit to set the restricted district. In case of breach, it will send SMS “stockade!+geo-info” to the authorized numbers.
Remark : The first longitude& latitude is coordinate of the top left corner of the Geo-fence, while the second longitude&latitude is the coordinate of the bottom right corner. It will alarm at 3minutes intervals for 1 time
, and using ", "separate between latitude and longitude , and";" between two point.
5.11.2 Cancel: Send SMS "nostockade+password" to deactivate this function.
This function will be out of effect after the unit moves outside the district.
5.12 Movement alert
5.12.1 Set up: When the unit stays immobile in a place for 3-10 minutes, the user can send SMS "move+password" to the unit, then the unit will reply “move ok!”. In case of such a movement, it will send SMS “device move” along with a Geo-info to the authorized numbers, It will alarmat 3minutes intervals for 1 time
5.12.2 Cancel: Send SMS "nomove+password" to deactivate the movement alert.
Remark: This function will be out of effect after the unit moves outside the district.
5.13 Overspeed alert:
5.13.1 Set up: Send SMS "speed+password+space+080" to the unit (suppose the speed is 80km/h), and it will reply "speed ok!". When the target moves exceeding 80 km/h, the unit will send SMS "speed+080!+Geo-info" to the authorized numbers. It will alarm at 3minutes intervals for 1 time.Once the he target moves doesn't exceed 80 km/h, the unit will stop sending the SMS "speed+080!+Geo-info" to the authorized numbers
Remark:the speed is three digits
5.13.2 Cancel: Send SMS nospeed+password to deactivate the overspeed alert
5.14SOS button
5.14.1 Press the SOS for 3 second, it will send "help me !+ Geo-info" to all the authorized numbers every 3 minutes. When the time is more than 30 seconds , the device will send signals, and call the authorization number automatically
5.14.2 Send the SMS"help me!"to cancel the SOS alarm.
5.15 Cut power alert
If cut power, the unit will send SMS alert.
SMS format: " DC Removed!".
5.16 set number in a online positioning platform
Add the number on the online positioning platform for tracking. Adding to the special platform, send SMS "number+password+space+tracker number" to the tracker, and will reply set number ok
for example “number123456 13500001111”. need the platform have the fuction.
5.17 Modes switch between “telephone” and “web”
5.17.1 For sending GPS data to IP address:
Set up: Send SMS "web + password" to device.
if set successfully, the device will reply SMS "set web ok".
After this, you can call the tracker. The tracker will hang up the phone and report the GPS data to IP address.
5.17.2 For sending GPS data to telephone:
Set up: Send SMS "telephone + password" to device.
if set successfully, the device will reply ‘set telephone ok’.
And then, the device will send GPS data to your telephone by SMS.
Remark:The default is sending the GPS data to the telephone.
5.18GPRS setting
In order to use GPRS function, the user needs to set IP, Port and APN ( access point name ) by sending SMS commands.
5.18.1 Set an IP address and port:
The IP address and port of Communication Protocol in the tracker can be modified and transferred data to other platform. Send SMS "ipport+password+space+ipaddress+port number" to the unit., and it will reply set ip and port ok If the tracker’s IP address and port should be modified to 123.98.43.254and 2456, send SMS "ip 123.98.43.254port2456"to the tracker.
Send SMS "noipport+password" to cancel the ip and port
5.18.2 Set APN
In order to send GPS data to IP address, you still must set mobile network Access Point Name (APN). If you don’t know the APN, you can consult local network service supplier. The format of set APN is "apn + password +space +CMNET". For example you send SMS "apn123456 cmnet" to the device. The device will reply SMS "Set APN ok. Send SMS "noapn+password" to delete apn
5.19 Mileage statistics
Send SMS:"clear+space+mile+password "to clear the mile , and will reply SMS"clear mile ok "
5.20Reading imei
Send SMS"imei+password'', and will reply imei number , for examply the imei number is 356895030630472 , it will reply imei:356895030630472
5.21Set Time
In order to make the time as the same with the user country, please send SMS command "time zone+password +space+ time zone". For example, if user country time is GMT+8, then send"time zone+password +space+08"to the device. If user country time is GMT-6, then send"zone123456 -6"to device. The device will reply SMS"set time zone ok".
Send SMS "notime zone +password"to cancel time zone
Remark::there is a space between time and zone , the time zone is 3 digits
5.22Set Web
In order to see your website in each replying SMS , For example you website is www.webs***.com, then send "home123456 +space+www.webs***.com" . Then it will reply"set home ok", when you want to cancel it, just send "nohome123456", it will reply SMS"cancel home ok".
6Attaching function
6.1Storage
When there is NO GPRS Coverage, tracker can store all info at internal memory, when GPRS is back ok, tracker will send all the stored info immediately to server through GPRS.and after sending all the stored info , it will send the message normally
6.2 Speaking
To support this function need our Professional configured sheduling screen .
6.3:Camera
This function need the platform support the camera, and operate through the platform.
6.4Vehicle alarm
Vehicle alarm is someone do the illegal operation to your car, it will send a message to the authorized number once every there minutes until recover normal .
6.5Shaking alarm
Shaking alarm is someone hit your car , it will send a message to the authorized number once every there minutes until recover normal .
7Other settings
Send SMS others+password+space+ABCD
Remark:A=0, close device sending reboot sms(default)
A=1, open device sending reboot sms;
B=0, close device "low electricity and auto power off"
B=1, open device " low electricity and auto power off"(default)
C=0, close device enter into blind area(there's no GPS signal) alarm(default)
C=1, open device enter into blind area(there's no GPS signal) alarm
D=0, prohibit system run normally before close all indicators(default)
D=1, make the system run normally before close all indicators
8Cautions
8.1 Make sure to read this manual carefully before using this product.
8.2 Please insert the SIM card before installing, and make sure the SIM card has no password, otherwise the tracker will not work normally.
8.3 The tracker’s work voltage is 12V-24V. Please use the tracker in the scope of work voltage.
8.4 Please make sure that all the cables of the tracker has been connected rightly, and then connect the tracker to host power.
8.5 The tracker works in wireless communications, to avoid electromagnetic interference or incompatible configuration, please stop using your tracker in the noticed place.
8.6 Keep the unit dries. Any liquid, i.e. rain, moisture, may destroy or damage the inside circuitry.
8.7 Clear the unit with a piece of dry cloth. Don’t clean in chemicals or detergent.
9. Faults & The solutions
Faults |
Solution |
Startup Fail |
Check the battery and see if it is fully charged or correctly installed. |
Hang up Fail |
In existence of an authorized number, an unauthorized number dials up the unit. Please initialize the unit and re-set up the authorized numbers. |
Monitor Fail |
Check if the authorized number is setup or in the coverage of signals. |
Location report in digits of zeros. |
Don’t use it in the place beyond reach of signals. Place the unit outdoors, especially when starting it up. |
9.Command
No |
FUNCTION |
SMS |
SMSREPLY |
CHAP |
1 |
Intialition |
begin123456 |
begin ok |
5.4 |
2 |
Change password |
password123456 666888 |
change password ok |
5.5.1 |
|