The XSD sand washing machine is widely used in the construction site, sand stone factory, the construction site of concrete dam of a hydropower station, concrete pre-cast parts factory, oil-well refilling and other industries. The original sealed structure and the reliable transmission device ensure the good dewatering effect after washing. Therefore, it’s an efficient sand washing equipment used together with the sand making machine. This series washing machine is arranged with a slant angle of 15°. The section under the water sink is surrounded by three weir plates, forming a sedimentation tank. The spiral head part is merged in the sedimentation tank, and it rotates continuously due to the motor driven by the speed reducer, and is supplied with washing water by the perforated plates at the bottom of the sedimentation tank. This equipment has three functions as washing, dewatering and classifying.
Technical Data:
Highlights:
Working Principle:
Applications:
Technical Data:
| Model | Wheel Size (mm) | Max feed size (mm) | Power (kW) | Weight (t) | Capacity (t/h) | Overall dimension (mm) |
| XSD2610 | Φ2600×1000 | 10 | 5.5 | 2.7 | 20-50 | 3255×1982×2690 |
| XSD2816 | Φ2800×1600 | 10 | 11 | 5.5 | 30-60 | 3540×3000×2880 |
| XSD3016 | Φ3000×1600 | 10 | 15 | 5.8 | 50-100 | 3845×3000×3080 |
Highlights:
(1)This type of sand washing machine has a simple structure, stable performance, high cleanliness, and little sand loss in the washing process, especially, the transmission part of the sand washing machine is isolated from the water and sand, so, its failure rate is much lower than the current common sand washing machine and the service life is long.
(2)The structure is reasonable; the original seal structure, full-closed oil-bath type transmission device and adjustable weir plate, enable this series product being efficient, durable, with a good cleaning and dewatering effect. In addition, they also contribute to keep the fine product stable.
(3)Large processing capability and low power consumption;
(4)Water-saving, without any pollution;
(5)Easy to maintain.
(2)The structure is reasonable; the original seal structure, full-closed oil-bath type transmission device and adjustable weir plate, enable this series product being efficient, durable, with a good cleaning and dewatering effect. In addition, they also contribute to keep the fine product stable.
(3)Large processing capability and low power consumption;
(4)Water-saving, without any pollution;
(5)Easy to maintain.
Working Principle:
The electric motor runs slowly with the impellor after decelerated by the belt, decelerator and gears wheel. The sand and stone flow into washing launder from feeding launder, rolls with the impellor, and grinds each other. The impurity covering the sand is washing away. At the same time, add more water, the strong water flow will take away waste and some low-weight wastes from washing launder. Through the above process, the washing function is finished. The clean sand and stone is lift up by vane. When it goes up slowly, the water begins to drop through the mesh and fall back in the washing launder. On one hand, water is removed from the sand and stone; on the other hand, the water can be fully used. Finally, the sand and stone goes to the out launder from the rotary impellor to finish the washing task.
Applications:
1. Sand Washing Machine can be used in hydropower station
Sand Washing Machine play an important role in the hydropower station. Concrete dams are built in four basic shapes: the concrete gravity dam, the concrete buttress dam, the arch dam, the arch-gravity. Concrete dams are used more often than fill dams to produce hydroelectric power because gates or other kinds of outlet structures can be built into the concrete to allow for water to be released from the reservoir in a controlled manner. And sand washing machine will be used in concrete dam building site of hydropower station.
2. Sand Washing Machine can be used in river pebble processing
Sand Washing Machine can be used in river pebble processing. River pebble can be used to produce sand. The whole sand-making production line consists of vibrating feeder, jaw crusher, VSI vertical shaft impact crusher (sand making machine), vibrating screen, sand washing machine, belt conveyor, electric control system, etc. Sand washing machine can separate the dust and powder from sand. Its new seal-structure and reliable driving device can make sure the cleaning effect.
3. Sand Washing Machine can be used in quarry
Sand Washing Machine is important equipment in quarry. A quarry is a type of open-pit mine from which rock or minerals are extracted. Quarries are generally used for extracting building materials, such as dimension stone, construction aggregate, riprap, sand, and gravel. Sand washing machine can separate the dust and powder from the sand and gravel in quarry.