MUYANG SWFP Series Fine-Grinding Hammer Mill
√ Higher stability
√ Simplified grinding system, Lower energy consumption
Main characteristics:
Application and adaptability:
Performance parameters:
At HuaGang & Tequ, A large number of customers witness the scene:
--High Capacity, Low Power, Stable Running
√ Improved grinding performance√ Higher stability
√ Simplified grinding system, Lower energy consumption
Main characteristics:
- With reducing hammer amounts and former four sets of hammer increasing to eight sets, homogeneous beating and dispersion, beating frequency increase, grinding efficiency is enhanced.
- The top of grinding chamber adopts a new-type adjustable support device, ease of installation and adjustment, helpful to destroy top circumfluent material layer and thus further enhance safety and grinding efficiency.
- Adopting of new-type adjustable screen hold-down plate, adjusting and adapting to hammer size errors, destroying circumfluent material layer, thus further improve safety and grinding efficiency.
- Air entering from shaft end and passing screen surface in shaft direction, effectively changing movement direction of raw materials, destroying circumfluent material layer, accelerating screening of small-sized particles, lowering temperature of grinding chamber and making grinding more complete.
- Adopting of new-type adjustable screen hold-down plate, adjusting and adapting to hammer size errors, destroying circumfluent material layer, thus further improve safety and grinding efficiency.
- Through optimal design for machine structure of SWFP66C series, further reducing equipment vibration, improving its safety and reliability.
- It is suitable for coarse-grinding and fine-grinding of various granular grain materials, such as corn, sorghum, rice, wheat, soybean meal, cottonseed meal, rapeseed meal.
- It is appliable for fine-grinding of various large-,medium- and small-sized aquatic feed and special feed production. It is also suitable for fine-grinding in the industry of pharmaceutical, alcohol and solvent.
- Sieve hole mainly used is 0.5-3.0mm.
| Model | SWFP66*60C | SWFP66*80C | SWFP66*100C | SWFP66*125C |
| Power | 55 | 75 | 90 | 110 | 132 | 160 | 200 | 220 | 250 |
| Feeder | TWLY20*60 | TWLY20*80 | TWLY20*100 | TWLY25*125 |
|
Settling bucket specifications (upper width * bottom width * height) |
1000*462*1200 | 1200*462*1400 | 1200*564*1600 | 1500*564*1600 |
| Impulse dust collector |
LNGM30 (40sleeves) |
LNGM45 (60sleeves) |
LNGM63A (84sleeves) |
LNGM81 (108sleeves) |
| Centrifugal fan | 6-23-12 No.6.3C N=7.5kW | 6-23-12 No.7.1C N=11kW | 6-28-12 No.8C N=15kW | 6-30-12 No.9C N=30kW |
|
Fan inlet duct (mm) |
300 | 350 | 450 | 450 |
|
Fan outlet duct (mm) |
400 | 450 | 530 | 500 |
| Enclosed auger | TLSSF20 | TLSSF25 | TLSSF25 | TLSSF32 |
| Elevator | TDTGK36/23 | TDTGK36/28 | TDTGK40/28 | TDTGK50/28 |
Performance parameters:
|
Model
|
Power |
Screen hole |
Capacity |
Power consumption |
|
SWFP66*60C
|
55
|
Φ1.0
|
3-5
|
12-19
|
|
Φ1.5
|
5-7
|
8-13
|
||
|
75
|
Φ1.0
|
4-6
|
12-19
|
|
|
Φ1.5
|
7-9
|
8-13
|
||
|
SWFP66*80C
|
90
|
Φ1.0
|
5.5-7
|
13-19
|
|
Φ1.5
|
8-11
|
8.5-12
|
||
|
110
|
Φ1.0
|
6-9
|
13-19
|
|
|
Φ1.5
|
10-13
|
8.5-12
|
||
|
SWFP66*100C
|
132
|
Φ1.0
|
7.5-10
|
10-15
|
|
160
|
Φ1.0
|
9-12
|
13-19
|
|
|
Φ1.5
|
15-18
|
8.5-12
|
||
|
SWFP66*125C
|
200
220
250
|
Φ1.0
|
≥16
|
≤14
|
|
Φ1.5
|
≥22
|
≤10
|
Test data:
| Model | SWFP66*125C(200kW) |
| Raw material | Northeast corn |
| Moisture | ≤14% |
|
Screen hole (mm) |
Φ1.0 | Φ1.5 |
|
Capacity (t/h) |
≥16 | ≥22 |
|
Power consumption (kW·h/t) |
≤14 | ≤10 |
At HuaGang & Tequ, A large number of customers witness the scene:
On August 18, 2009, in the feed factory of HuaGang Agricultural Group at City Nanning of Guangxi Province of China, more than forty heads and senior manager from Chinese well-known enterprises such as Tongwei Group, New Hope Group, West Hope Group, CP Group, Zhengbang, Yangxiang, Twins, Liyuan and Fufeng collectively witnessed a test of high-capacity for the Third Generation SWFP Series Fine-Grinding Hammermill.
On October 14, 2010, in Wuhu Tequ Agriculture and Animal Husbandry Technology Co., Ltd., a large number of feed field entrepreneurs from Tequ Group, East Hope, Yang Xiang, Shuanghui Group witnessed together the new breakthrough of capacity on Third Generation SWFP Series Fine-Grinding Hammermill
Jiangsu Muyang Group Co., Ltd.
Jiangsu Muyang Group Co., Ltd.
E-mail: eb＠muyang.com
http: //www.muyangbiz. com