Fencing Mesh Welding Machine (GWC2600) Characters:
1. For the production of high quality fencing mesh in large batches, the material can be cold drawn wire, stainless steel wire and galvanized wire.
2. Line wire straightening system is suitable for processing different raw material.
3. Line wire loop and balancing system keeps the line wires fed smoothly and continuously.
4. Control system: Industrial PC, PLC and other electronics components are international famous brands. Mesh sheet specification, production data and welding parameters can be easily input and edited by using the touchable screen display.
5. High speed mesh cutter: Automatic start-stop control, sync with the welding line, max. Speed can be up to 120 times per minute.
| Model | GWC-2050 | GWC-2200 | GWC-2400 | GWC2600 |
| Installed power(kva) | 6*40 | 6*40 | 6*40 | 6*40 |
| System coltagte(v) | 380V 50Hz | 380V 50Hz | 380V 50Hz | 380V 50Hz |
| Control voltage(v) | DC 24V | DC 24V | DC 24V | DC 24V |
| Power cable cross-sectional area | 3*150mm ² | +1*50mm ² | 3*150mm ² | 3*185mm ² +1*95mm ² |
| M ax. mesh width | 2200 | 2300 | 2600 | 2600 |
| L ine wire spacing | 50-200 CNC | 50-200CNC | 50-200 CNC | 50-200CNC |
| Cross wire spacing | ≥ 25mm steplessly adjustable | |||
| Wire diameter(mm) | 3-6 | 3-6 | 3-6 | 3-6 |
| Max. welding capacity | 6+6 | 6+6 | 6+6 | 6+6 |
| Max. wlding speed(time/min) | 60-100 | 60-100 | 60-100 | 60-100 |
| M ax. welding spot nos. (group) | 20 | 24 | 24 | 26 |
| Pressed air(MPa) | ≥ 0.6 | ≥ 0.6 | ≥ 0.6 | ≥ 0.6 |
| Wire feeding methood | Pre-cut/off-coil | |||
| Caterconrner accuracy(mm) | ≤ 2 | ≤ 2 | ≤ 2 | ≤ 2 |
| Raw material | Cold drawn wire, stainless wire, galvanized wire | |||