Stirrup Bender (WG12B-2) CHARACTERS:
1. Straightening system: One horizontal straightening unit and one vertical straightening unit (patented technology) combine with 4 traction rolls drove by servo motor, this ensures wires can reach the most accurate straightening effect.
2. Material feeding system: 2 payoffs with brakes, suitable for single and double strand, buffer unit can reduce the resistance and instability during the process of decoiling.
3. Bending and cutting system (patented technology): Bending arm driven by servo motor can protrude or draw back while bending different angles, when cutting system receives signal, it will finish cutting work synchronously.
4. Control system: CNC control with malfunction alarm, PLC, servo motor and electric components use Japan and Germany brand.
5. Can edit any 2D shapes with max. 50 angles, the data base can store more than 500 shapes.
6. Different shapes can be processed continuously without stop, furthermore no need to stop the processing while adjusting the bending angle.
7. Automatic diagnosis functions, 2 standard ports: RS232/RS422 can be connected to scanner.
Product Specification/Models
Model: WG12B-2
Single wire: Φ 6 -12 [mm]
Double wire: Φ 6 -10 [mm]
Max bending angle: 180°
Max bending speed: 800 -1050 [° /sec]
Max pulling speed: 90 -110 [m/min]
Max length of the stirrup side: 2300 [mm]
Min length of the stirrup side: 60 -90 [mm]
Length tolerance: ± 1 [mm]
Bending tolerance: ± 1°
Production capacity (single wire): 900 [PCS/h]
Production capacity (double wire): 1800 [PCS/h]
Average air consumption: 6 [l/min]
Average power consumption: 5 [KW]
Installed power: 30 [KW]
Bending direction: Double direction.
1. Straightening system: One horizontal straightening unit and one vertical straightening unit (patented technology) combine with 4 traction rolls drove by servo motor, this ensures wires can reach the most accurate straightening effect.
2. Material feeding system: 2 payoffs with brakes, suitable for single and double strand, buffer unit can reduce the resistance and instability during the process of decoiling.
3. Bending and cutting system (patented technology): Bending arm driven by servo motor can protrude or draw back while bending different angles, when cutting system receives signal, it will finish cutting work synchronously.
4. Control system: CNC control with malfunction alarm, PLC, servo motor and electric components use Japan and Germany brand.
5. Can edit any 2D shapes with max. 50 angles, the data base can store more than 500 shapes.
6. Different shapes can be processed continuously without stop, furthermore no need to stop the processing while adjusting the bending angle.
7. Automatic diagnosis functions, 2 standard ports: RS232/RS422 can be connected to scanner.
Product Specification/Models
Model: WG12B-2
Single wire: Φ 6 -12 [mm]
Double wire: Φ 6 -10 [mm]
Max bending angle: 180°
Max bending speed: 800 -1050 [° /sec]
Max pulling speed: 90 -110 [m/min]
Max length of the stirrup side: 2300 [mm]
Min length of the stirrup side: 60 -90 [mm]
Length tolerance: ± 1 [mm]
Bending tolerance: ± 1°
Production capacity (single wire): 900 [PCS/h]
Production capacity (double wire): 1800 [PCS/h]
Average air consumption: 6 [l/min]
Average power consumption: 5 [KW]
Installed power: 30 [KW]
Bending direction: Double direction.