Main technical parameters:
Type: YN-60KW
Power input: three-phase five-wire 380V; 50Hz ± 1%
Microwave frequency: 2450MHz ± 50Hz
Rated input apparent power: ≤ 90KVA
Microwave output power: ≥ 60KW (adjustable)
Microwave input current: 6A / only the magnetron
Microwave Operating Current: 0.25 ~ 0.3A / only magnetron
Overall dimensions (length × width × height) about: 14500mm × 1100mm × 1650mm
Conveyor belt width: 550mm out of the spout height: 120mm
Transmission speed: 0.5 the ~ 5m/min (VVVF)
Temperature: -5 ~ 45 ℃ Relative humidity: ≤ 80%
Microwave leakage: in line with national GB 10436-1989 standard for microwave radiation
Electrical Safety: Complies with the national GB 5226.1-2002 Electrical safety of machinery standards
Product Description and application:
Microwave in the rapidly changing high-frequency electromagnetic field interaction with the material elements, absorption of the thermal effects of microwave energy is directly converted to medium heat, microwaves are absorbed by the object, the object self fever, heat from inside the object, while starting an external, can be inside and outside at the same time heating different substances ability to absorb microwave heating effect varies, depending on the dielectric loss of the substance. Water is a very strong absorption of microwave material, material can be generally contains water with microwave heating quickly and evenly to achieve good results.
1, the drying speed. Conventional methods such as: dry steam, electric drying, hot air drying off from 10% moisture content to below 1% need more than a dozen hours, the use of microwave drying only ten minutes; off by 5% water content to less than 1% of conventional The method takes six to seven hours, the use of microwave drying only a few minutes; off by 30% -20% moisture content to below 1%, the conventional method requires 20 hours, using microwave drying in just two minutes later. Conventional thermal drying often heat loss in the environment and equipment, the high temperature of the indoor environment. While the microwave is a direct material role, and thus no additional heat loss, the microwave drying process no more than phenomena. The device can open that is, which uses the thermal inertia of conventional thermal drying, easy operation, the microwave power adjustable transmission speed from scratch continuously adjustable, easy to operate.
2, to keep the material colors. Microwave drying without heat conduction, material, fever, fast-drying, the temperature of the contact material is much lower than conventional methods, will not cause material fission phenomenon.
3, pipeline operations, the operating environment. Compared with the conventional method, microwave equipment does not require a boiler, complex piping systems, coal field, and transport vehicles, with water and electrical conditions are. In contrast, you can be saving 30% -50%. Improve working conditions, save floor space, equipment working environment, noise, greatly improved the working conditions, the entire operation of the microwave equipment just 2-3. Microwave drying equipment with a feeder, discharge conveyor, vibrating screen, packaging machines and other equipment connected to form an assembly line, thereby greatly enhancing the productivity of labor in the workshop, there is no dust flying status, in line with national standards for GMP production.
Type: YN-60KW
Power input: three-phase five-wire 380V; 50Hz ± 1%
Microwave frequency: 2450MHz ± 50Hz
Rated input apparent power: ≤ 90KVA
Microwave output power: ≥ 60KW (adjustable)
Microwave input current: 6A / only the magnetron
Microwave Operating Current: 0.25 ~ 0.3A / only magnetron
Overall dimensions (length × width × height) about: 14500mm × 1100mm × 1650mm
Conveyor belt width: 550mm out of the spout height: 120mm
Transmission speed: 0.5 the ~ 5m/min (VVVF)
Temperature: -5 ~ 45 ℃ Relative humidity: ≤ 80%
Microwave leakage: in line with national GB 10436-1989 standard for microwave radiation
Electrical Safety: Complies with the national GB 5226.1-2002 Electrical safety of machinery standards
Product Description and application:
Microwave in the rapidly changing high-frequency electromagnetic field interaction with the material elements, absorption of the thermal effects of microwave energy is directly converted to medium heat, microwaves are absorbed by the object, the object self fever, heat from inside the object, while starting an external, can be inside and outside at the same time heating different substances ability to absorb microwave heating effect varies, depending on the dielectric loss of the substance. Water is a very strong absorption of microwave material, material can be generally contains water with microwave heating quickly and evenly to achieve good results.
1, the drying speed. Conventional methods such as: dry steam, electric drying, hot air drying off from 10% moisture content to below 1% need more than a dozen hours, the use of microwave drying only ten minutes; off by 5% water content to less than 1% of conventional The method takes six to seven hours, the use of microwave drying only a few minutes; off by 30% -20% moisture content to below 1%, the conventional method requires 20 hours, using microwave drying in just two minutes later. Conventional thermal drying often heat loss in the environment and equipment, the high temperature of the indoor environment. While the microwave is a direct material role, and thus no additional heat loss, the microwave drying process no more than phenomena. The device can open that is, which uses the thermal inertia of conventional thermal drying, easy operation, the microwave power adjustable transmission speed from scratch continuously adjustable, easy to operate.
2, to keep the material colors. Microwave drying without heat conduction, material, fever, fast-drying, the temperature of the contact material is much lower than conventional methods, will not cause material fission phenomenon.
3, pipeline operations, the operating environment. Compared with the conventional method, microwave equipment does not require a boiler, complex piping systems, coal field, and transport vehicles, with water and electrical conditions are. In contrast, you can be saving 30% -50%. Improve working conditions, save floor space, equipment working environment, noise, greatly improved the working conditions, the entire operation of the microwave equipment just 2-3. Microwave drying equipment with a feeder, discharge conveyor, vibrating screen, packaging machines and other equipment connected to form an assembly line, thereby greatly enhancing the productivity of labor in the workshop, there is no dust flying status, in line with national standards for GMP production.