CE-520(SMT Splice Tool) :

Using Splicing Tool(CE-520A&CE-520B) ensures that SMT component tapes can be joined securely and quickly. A special brass shim is riveted into the ends of the SMD tape, joining them securely, and allowing them to still pass through the sprocket wheel of the feeder. Accurate alignment is achieved by arranging the tape on the locating pins of the splicing tool.

 

 Operation steps:

1).Use the cutting tool to cut the tape at 90 degrees

2).Using the pin guides,mount the brass clip onto the tool mount the two reel center and clamp.

3).Remove a single strip of single splice tape

4).Apply the strip to the top of the connecting reel.