MTG1000 series is a carrier-grade NGN trunk gateway. There are four different models with 1*E1/T1(optional), 2*E1/T1(optional), 4*E1/T1 and 8*E1/T1. It supports SIP-T/SIP/H.323 protocol to connect with SIP-T/SIP/H.323 soft switch, and supports PRI/SS7 signaling protocol to connect with PSTN. Up to 240 channels processing capacity, it guarantees the maximum performance of 8*E1/T1 trunk gateway ( G.711/G.723/G.729 codec calls and T.38/Pass-through Fax).
Key Benefits
•energy efficiency concurrent processing, up to 240
•Service oriented architecture, rich services , support voice, IP fax and Modem/POS service
•Flexible dial-up rules and operation, in order to adapt to the different work scene.
•Voice codec: G.711A/U,G.723.1,G.729A/B, iLBC
•Good compatibility, support Asterisk, Elastix, Freeswitch and Small and medium IPPBX platform
Voice & FAX
•G.711A/U law, G.723.1, G.729A/B,iLBC
• Silence Suppression & Detection
• Comfort Noise Generation (CNG)
• Voice Activity Detection (VAD)
• Echo Cancellation (G.168)
• Adaptive (Dynamic) Jitter Buffer
• Call Progress Tone Generation
• Programmable Gain Control
• T.38/Pass-through fax, up to14.4kbps
• Modem
• RFC3407
• FAX/X-FAX
QoS control: ToS, DSProtocol IP Features
•SIP-RFC 3261, 3262,3263,3264, 3265,3515,2976,3311
• SDP -RFC 2327
• RTP/RTCP-RFC2198,1889
• SIP-T, RFC3372, RFC3204, RFC3398
• H.323, ITU-T H.323 V4
• SIP domain register
• IP group management
• Trunk priority management
• H.323
• Peer/Access work mode
• IP address/domain authentication
• SIP username/password register to remote
Call Feature
Signal
Physical Interface
Physical
Call Feature
•DTMF: RFC2833, SIP INFO, INBAND
• Back tone/busy tone control
• Digit Map
• Dial rule configuration, max 2000 rules
• Overlap receiving
• Dial time control
• Time slot group management
• E1/T1 port group management
Signal
PRI/PRA
ISDN E1/T1,Japan T1.
ITU-T I.431, Q.921, Q.931, ETSI Q.sig
ISDN E1/T1,Japan T1.
ITU-T I.431, Q.921, Q.931, ETSI Q.sig
SS7/No.7
ITU, ANSI, ETSI, ITU-China,
MTP layer 1/2/3, ISUP/TUP
SS7 MTP link management
SS7 circuit maintenance
Call Feature
Routing & Num manipulation
Maintain & Update
ITU, ANSI, ETSI, ITU-China,
MTP layer 1/2/3, ISUP/TUP
SS7 MTP link management
SS7 circuit maintenance
Call Feature
•DTMF: RFC2833, SIP INFO, INBAND
• Back tone/busy tone control
• Digit Map
• Dial rule configuration, max 2000 rules
• Overlap receiving
• Dial time control
• Time slot group management
• E1/T1 port group management
•Many routing way:PSTN-PSTN, PSTN-IP, IP-IP, IP-PSTN
• Intelligent routing
• Routing time control
• 256 routing
• Caller/callee manipulation
• 128 number manipulation
Maintain & Update
•Web based configuration
• HTTP/Telnet configuration
• Data backup/restore
• Support English and China language
• Firmware upgrade by TFTP
• Web & telnet login password modify
• SNMP management
• Syslog: Debug, Info, Error, Warning ,
Notice
• CDR
NTP ConfigurationPhysical Interface
ISDN Interface: 8E1/T1, G.703, 120Ω RJ-48
Ethernet Interface:
FE0(WAN):service eth interface),
FE1(LAN):management eth interface) *10/100M Base-Tx RJ45
FE1(LAN):management eth interface) *10/100M Base-Tx RJ45
Management Interface: 1 Console RFC2833,9600bps
Physical
• Power backup
• Power: input:100-240V,50-60Hz,
1.1A Max output:220 VAC,0.5A
• Power consumption: 25W
• Operation Humidity: 10%-90% no condensation
• Dimension(w/D/H): 436*300*44.5mm(1U)
• Weight: 2.0kg
Color & material: black, iron box