Features:
Complete Ethernet VLAN and multicastWD-V208 provides Ethernet VLAN function and improves security and performance. A VLAN is used to isolate users to improve security and performance. VLAN can control the traffic of broadcasting data in a whole network effectively and optimize the BUR( bandwidth utilization ratio)of multicast application
rate limiting
Flexibility of network devices, the limitation of HSUPA(upstream rate) can control the rate of bandwidth of users.
Complete Ethernet VLAN and multicastWD-V208 provides Ethernet VLAN function and improves security and performance. A VLAN is used to isolate users to improve security and performance. VLAN can control the traffic of broadcasting data in a whole network effectively and optimize the BUR( bandwidth utilization ratio)of multicast application
rate limiting
Flexibility of network devices, the limitation of HSUPA(upstream rate) can control the rate of bandwidth of users.
Upstream access control
WD-V208 not only support 802.1x port access authentication, but also identified a limited number of MAC addresses, which can access the network from a particular port. The function prevents unauthorized data flows to the port and ensure network security. Another way is to limit the number of users can access the network (MAC address).
WD-V208 not only support 802.1x port access authentication, but also identified a limited number of MAC addresses, which can access the network from a particular port. The function prevents unauthorized data flows to the port and ensure network security. Another way is to limit the number of users can access the network (MAC address).
Additionally, WD-V208 offers each port packet classification rules, according to the classification rules you can set.
Compatible with ADSL2/ADSL2+
Except for VDSL2 PTM mode, WD-V208 can compatible with ADSL2+ If one slave is ADSL2/ADSL2+, The DSLAM will detect them quickly and adjust the mode to ADSL2/2 mode and connect the terminal devices. This function is perfect solution for the distributor updating the exsiting ADSL2+ to VDSL2.
Compatible with ADSL2/ADSL2+
Except for VDSL2 PTM mode, WD-V208 can compatible with ADSL2+ If one slave is ADSL2/ADSL2+, The DSLAM will detect them quickly and adjust the mode to ADSL2/2 mode and connect the terminal devices. This function is perfect solution for the distributor updating the exsiting ADSL2+ to VDSL2.
specification
model WD-V208
interface 1*10/100 Base-TX
LAN 8*RJ11
TEL 8*RJ11 DSL
Transmission media Phone line( twisted pair)
modulation OFDM
Transmission rate 100Mbps for 300meters ditance
model WD-V208
interface 1*10/100 Base-TX
LAN 8*RJ11
TEL 8*RJ11 DSL
Transmission media Phone line( twisted pair)
modulation OFDM
Transmission rate 100Mbps for 300meters ditance
Power source AC 100V-240V 60/50Hz
Protocol standard 6.993.2 VDSL2 IEEE802.3,IEEE 802.3u
Transmission distance 3000 meters
Support operating system Windows 98/ME/NT/2003/7, Windows XP Home/Pro, Mac OSX , Linux
Working environment Working temperature: -20℃-80℃working humidity: 5%-95% non-condensed state
size 430mm×380mm×44.5mm
weight 4kg
certification FCC, CE, ROHS
Brief Description
weight 4kg
certification FCC, CE, ROHS
Brief Description
WD-V208 VDSL2 with 8 DSL ports with high speed and stable tranmission rate and Complied with VDSL2 standard, ITU-TG.993.2.
can enlarge your bandwidth network service ,and also can be as master using together with VDSL as slave.
can enlarge your bandwidth network service ,and also can be as master using together with VDSL as slave.
WD-V208 VDSL2 which is standard 1U device, supporting ADSL2/ADSL2+, provide interoperability of using different xDSL devices but the same IP DSLAM, and support HDTV.