Spiral wound gaskets
Introduction:
1 Good compression and resilience rate
Steam/gas/oil/natural gas/cracking gas/acid/alkali/salt solution
camprofile gasket
Brief introduction:
Camprofile gasket, according to different medium, you can choose flexible graphite, PTFE, non asbestos board or other soft metal, and then paste these medium on both sides of the gasket. You can used it directly without seal layer , and can achieve good sealing effect, but it can damage the surface of the flange in high-pressure situationsMaterial:
The seal material is given priority to graphite, when it may pollute the medium or produce chemical reaction,you should choose ptfe/eptfe /non asbestos materials/silver.
Advantages:
1 The gasket without damage to the flange surface , easy to be dismantled.
Introduction:
Spiral wound gasket is a kind of sealing which is widely used at present, it can be used in high temperature, high pressure,ultralow temperature or under vacuum conditions , it can solve all kinds of chemical corrosion problem of gasket through change the gasket material combination.
Material:
Metal corrugated band and nonmetallic belt. (ceramic/flexible graphite/PTFE/asbestos/non asbestos), adding reinforcement ring according to the mining’s requirement.
Type:
Basic form/ inside/outside/inner and outer ring
Advantages:1 Good compression and resilience rate
2 Moderate plasticity.
3 Good tensile strength.
4 Excellent corrosion performance.
5 Can't soften under high temperature; can’t shrink under the low temperature.
Applicable medium/environment:Steam/gas/oil/natural gas/cracking gas/acid/alkali/salt solution
camprofile gasket
Brief introduction:
Camprofile gasket, according to different medium, you can choose flexible graphite, PTFE, non asbestos board or other soft metal, and then paste these medium on both sides of the gasket. You can used it directly without seal layer , and can achieve good sealing effect, but it can damage the surface of the flange in high-pressure situationsMaterial:
The seal material is given priority to graphite, when it may pollute the medium or produce chemical reaction,you should choose ptfe/eptfe /non asbestos materials/silver.
Advantages:
1 The gasket without damage to the flange surface , easy to be dismantled.
2 Reduce leakage and the pollution of the environment.
3 Metal core of camprofile gaskets can be reused, expecially for expensive heat exchanger gasket.
Applicable medium/environment: It is suitable for high temperature and high pressure, alternating conditions, it can apply to the flange’s joint of the heat exchanger, containers, etc., it is an ideal substitute for traditional metal jacketed gasket. Material resistant to the high temperature of 1000 ° C/pressure of 250 bar.