The 0729-1752-99 inclinometer measures tilt angle and inclination in one or two axes with high accuracy and resolution. This inclinometer utilizes a Fredericks, dual axis, electrolytic tilt sensor and tilt sensor signal conditioner.
 

The Fredericks RS-232 Tilt Sensor Inclinometer is designed and manufactured in the United States of America at our facility in Huntingdon Valley, Pennsylvania. It functions with any Fredericks electrolytic tilt sensor which provides a highly stable and repeatable output at a competitive price. It has the option of being mounted in a robust plastic or metal housing with epoxy potting to provide IP66 environmental protection. The RS-232 interface makes this tilt sensor inclinometer optimal for a variety of applications in many sectors. Its features include, but are not limited to, the ability to: 
 

1.  Set zero position

2.  Output X and Y position through RS-232

3.  Output temperature through RS-232

4.  Set a timed output through RS-232
 

Features:
 

RS-232 interface

Ability to set and save 0 position

±60° angle range  
 

Example Applications: 
 

1.  Aerial lift platform level monitor or control

2.  Blade angle measurement of road graders and pavers

3.  Robotic controls

4.  Satellite dish alignment

5.  Navigation instrumentation and compensation

6.  Wheel alignment systems 
 

Benefits:
 

1.  Competitively priced

2.  Extremely long life

3.  Very low power consumption

4.  Excellent resolution, repeatability, and long term stability

5.  Excellent customer support

6.  On time deliveries

7.  Manufactured in The United States of America
 

Operating Specifications:
 

Supply Voltage: +3 to +5 V dc

Power Protection: None

Output: RS-232 Digital 16-bit

Operating Temperature: -40° to +85° C

Storage Temperature: -50° to +100° C

Dimensions: 1.25" x 1.25" (L x W)

Mounting Holes: 0.089" diameter, 1.05" center to center
 

RS-232 Communication Specifications: 
 

Baud Rate: 9600

Data Bits: 8

Parity: None

Stop Bits: 1 
 

RS-232 Commands: 
 

'X' Output 16-bit X axis value (0 to 65535)

'Y' Output 16-bit Y axis value (0 to 65535)

'T' Output 10-bit temperature (0 to 1024)

'S' Start a timed output

'R' Reset the 'S' command (stop timed output)

'1' to '5' Set the delay for the 'S' command from 1 to 5 seconds, default is 1 second

'@' 'Z' '#' Save the current position as 0

'&' 'C' '*' Clear the saved 0 position
 

Notes:
 

RS-232 commands are case sensitive.