2x1200 plain carbon steel slitting machine is to slit carbon steel coils of max 1250mm width and 0.25-2.0mm thickness.
The main composition: coil loading car, decoiler, coil head guide and shoveler, pinch-feeder, side guide, disc shearer, scrap reeler, hole accumulator, tensioner and pre-separator, separator and recoiler, and discharging car.
JY-2x1200 slitting machine is to slit Plain Carbon Steel coils of max 1250mm width and 0.25-2.0mm thickness.
The main composition: coil loading car, decoiler, coil head guide and shoveler, pinch-feeder, side guide, disc shearer, scrap reeler, hole accumulator, tensioner and pre-separator, separator and recoiler, and discharging car.
With continuous layout of whole line and solid structure of each unit, the slitting line can precisely slit coil and recoil sub coils.
Coil loading car: 1.5KW cycloid motor x 1500mm distance travel, Φ 125 x 500 hydraulic cylinder for 10T
pinch-feeder: 4kw cycloid motor, Φ 150 x 1350 pinch feeding roller
Side guide: Φ 90 x 125 vertical roller, two pairs, press roller Φ 80 x 1350mm, adjust range: 250-1250mm
Disc shear: D220× d120× T10mm, key 36mm
Disc knife material: 6CrW2Si, HRC 58-60
Slitting motor: DC22KW
Slitting speed: max 60m/min
Scrap reeler: Φ 450 x 350 creel diameter, 3kw x 2 motors
Strips separating disc: D180× d65 x 3mm
Recoiling block: diameter 508mm
Recoiling motor: DC 37KW
Coil discharging car: 1.5KW motor and Φ 125 x 500 hydraulic cylinder
Hydraulic station: 4KW-4, 450L oil volume