| Model Number: | GF2013 |
|---|---|
| Brand Name: | GFUVE |
| Place of Origin: | China (Mainland) |
Quick Details
Specifications
INTRODUCTION:
Wireless medium voltage ammeter recorder is installed on 6KV-35KV power line, this phase load current
measuring calculation, and the measured value through the 433M wireless communication transmission to
intelligent terminal to analyzer and use. GF2013 adopts Rogowski Coil measurement technology with low
power consumption and power on installation to make it use at ease.
- Measurement Accuracy: class 1%
- Small volume, light weight, easy to overhead installation, safe environmental protection
- Battery power supply, low power consumption, long life
- Transmission distance: 100 m
- Simple structure, operation convenient
- Install or remove with power on
PARAMETERS:
| Basic parameters | |
|---|---|
| Type |
Recording ammeter kit 3 wireless current sensors (GF2013A, GF2013B, GF2013C) 433M wireless data reader(GF2013R) PC-Linksoftware software(GF2013S) Carrying case |
| Data recording interval | 5min, 10min,15min, 30min; |
| Communication distance(wireless) | 100m |
| Communication | 433M, 868M or 915M (option) |
| Installation | Installation with electricity; remove with electricity |
| Battery | 3.6 volt lithium battery,9000mAh |
| Software requirements | PC-LinkSoftware & Microsoft Excel |
| Processor | 100 MHz or Higher ( 200 MHz or higher recommended) |
| RAM | 32 MB, 64M Recommended |
| Drive Space | 15 MB to load software, 10 MB of operating space |
| Electrical parameters | |
| Amps accuracy | ±1% of reading plus 2 counts |
| Frequency | 50/60 Hz |
| Range of operation | |
| Voltage | 69kV, 35kV, 20KV, 10kV, 6kV |
| Current | 1-100A, 1-300A |
| Sensor opening | up to 3.3 cm |
| Resolution | |
| 1-99.9A | 0.1A |
| 100-300A | 1A |
| Mechanical parameters | |
| Dimensions (W×D×H) (mm) | 500x600x175 |
| Weight (kg) | 0.42 |
| Environmental conditions | |
| Operating temp | -40°C to 60°C |
| Use of position | Outdoor or indoor |