10mm Aluminum Round Tile Edge Trim10mm aluminum round tile edge trim


1). Credible quality
2). Stylish design
3). Competitive price
4). Sincere service
5). Stable and timely supply



Product Description:


Model NO.: HBA
Product name: 10mm aluminum round tile edge trim

Material: Aluminium alloy
Surface: Milling, drilling, anodizing, power coating, polishing, customized request, etc.
Color: Silver, black, bronze, champagne or customized color
Dimension: H: 9, 10, 12.5mm L: 250cm
Shipping port: Xiamen
Payment term: T/T, Western Union
Package: Plastic film packing/piece; Wooden, carton packing/carton or customized package



Properties:

1). It can be used wherever unusual chemical reactions are not to be expected. To prevent corrosion care must be taken with the application of cement and mortar. Since aluminium is sensitive to alkaline materials, mortar, tile adhesive and grout must be cleaned immediately from all visible surfaces.
2)The profile needs to be thoroughly embedded in the contact layer. This prevents the formation of air pockets where alkaline solutions of water could collect.


Advantages:

1). Quality-assured products
2). Reasonable price;
3). Pure 99.7% aluminum materials without any scrap used;
4). Reliable quality & Strictly quality control process assured higher quality.
5). The products are manufactured by first-class automatized equipment and and advanced quality inspection&test facilities.
6). Non-toxic processing
7). Advanced technology

Application:

1). Tile trims are used to compensate for differences in height between two flooring surfaces such as those which might occur between a tiled floor and a carpeted floor, for example. It provides a smooth inclined junction between the two, which also protects the edges of the tiles from any damage.
2). The shape and material have been selected so that these profiles are also able to
Withstand a great deal of stress. Loads acting at a point are distributed evenly through
The floor and the foundations.
3). Tile trims are highly suited for use in busy areas such as public buildings or shopping centres. Theymay also be used in the open air (such as for doorways and garage entrances.



Installation:

1). This tile trim appropriate to the height of the tiles should be selected.
2). Tile adhesive should be applied around the junction using a serrated trowel.
3). Press the profile into the adhesive bed and align it. Follow any existing joints in the foundations.
4). Spread mortar over the entire surface of the joint.
5). Press in tiles firmly and align them so that they are flush with the top edge of the profile. Lay the tiles without leaving any gaps.
6). Allow a joint of 2-3 mm around the profile itself.
7). Then fill the space between the tiles and the profile with grout.