Baseboard heater
Bathrooms and shower rooms are the most vulnerable places in any house,
in which the favorable environment for life and propagation of mold is created.
If at high humidity there is no good ventilation system, the appearance of fungus and mold is only a matter of time.
The mold would eventually show itself
on any surface: concrete,
stone, plastic, paint.

General technical data of the Timer

Rated power supply:	220 V
Maximum load current:	16 А (3,5 kW)
Power consumption:	450 mW
Ingress protection rating/class:	IP20 / II
Acceptable relative air humidity:	80%
Time adjustment range:	from 10 to 180 minutes

In addition to untidy appearance, in time, the fungus in the bathroom will become a cause of paint and plastering exfoliation, damage home decoration materials; cracks will appear in concrete, that is to say all these things lead to the necessity to make renovations.
The mold spores begin to germinate when the appropriate environment
is created:

• humidity is higher than 90%;
• Air temperature is higher than 20 degrees;
• insufficient ventilation.

Under such conditions, the fungus in the bathroom begins to strongly pierce by thinnest filaments through the all moist surfaces and to be very quickly propagated.

To keep clean, you will have to spend a lot of time and energy in order to fight
with mold and fungus.

The mold, in itself, is not really harmful, but its spores, exuded in a great amount, are a direct threat to your and your family's health.
The mold fungus is propagated by spores, in the fission process they are belched
into the air in a great amount and instantly spread all over the premises.
Together with air, the spores get into the respiratory system and then into the blood circulatory one, that is causative of a wide variety of diseases.

The threat to health is really significant, that's why a question of how to drive away the mold and protect an organism against its poisonous influence needs to be solved in time.
No medicine can help until you exclude the main cause of the impairment
of your health – moistness, fungus and mold!
If you don't eliminate the moistness in premises, you would never get rid
of fungus and mold!
Why do we need all this know? In order to increase the efficiency in the fight with the depredator.
How to remove the fungus in the bathroom?

In order to protect your health and not to spend money on off-schedule repairs, we recommend the efficient and affordable solution which prevents the mold appearance and keeps clean:
Moisture dryer for bathrooms!

The moisture dryer for bathrooms is designed for installation under the ceramic or stone tile or border in order to remove moisture in hard-to-reach places of bathrooms, shower rooms, swimming pools, saunas, kitchens
and other premises of high humidity.
Removing moisture, the dryer prevents the formation
of favorable conditions for the mold
and fungus growth.

The heater, laid under the decorative flooring, generates heat which ensures the evaporation of excessive moisture on the surface and prevents the mold and fungus formation.
The timer allows to apply the dryer only in necessary periods of time and automatically switches it OFF, thus decreasing electrical energy consumption costs.

The solution is represented by two packaged products:
1. The first one is a dryer which includes the special heater of a specified length, equipped with the installation wire, installation and operation user manual
2. The second one is a timer which includes the timer, the installation and operation user manual.

The heater and timer are provided with technical certificates containing the information about technical data of products and warranty obligations.


Inconspicuous and cost-efficient care for cleanliness and your health in areas of excessive moisture that doesn't need your assistance

• excludes a cause of the mold and fungus formation – humidity
• absolutely safe (doesn't give off hazardous chemical substances or emit radiation)
• long-lifetime performance
• doesn't require additional space and is unnoticeable in premises