Wood pellets has been familar to people in recent years. However, a few people still don't know how wood pellets produced. Obviously, the wood pellets are made by the wood pelletizing through pressing raw materials like wood shavings, branches, wood trimmings, sawdust and bamoo etc Wood pellet maker supplier/hot selling wood pellet making machine is suitable for fuel factories, boiler factories, power plants, wood processing factories (particle board, fiber board, plywood and core-board) and furniture manufactories (floor board plants, wood door factories and wood frame houses). They can also be used in agriculture (crops or sugarcane processing) and forestry station. In addition, the products are utilized in packaging factories, paper mills and municipal solid waste disposal.

Here are some procedures of wood pellet maker supplier/hot selling wood pellet making machine in making wood pellets.

This is a complex process for wood pellets production. Firstly, the dimension of raw material should be suitalbe for the wood pelletizing flat die. Raw materials are required to cut down the small pieces like sawdust. Secondly, the moisture content of raw material should be controlled between 13% and 15% in order to get high quality wood pellets through the dryer. Third, put the pretreated materials into the wood pellet mill to press. The wood pelletizing will compress them under the pressure between the roller and flat die with many holes to make wood pellets. Make sure the wood pelletizing remain at a high pressure so as to hold pellets naturally. Finally, it is essential to cool and package for the wood pellets. It is much better to store and transport the wood pellets. If you follow our notes above strictly and correctly, you will get perfect and high quality wood pellets energy.

Daily Inspection and Maintennance of Wood Pellet Maker Supplier/Hot Selling Wood Pellet Making Machine:

1. Only after feeding you can start wood pellet maker, operating without raw material is forbidden.

2. If you find clamping or abnormal noise, you should halt machine immediately. Start machine again after solving the problems.

3. Before initial operation make sure gearbox is added with oil and all bearings are lubricated properly according to the instruction manual.

4. When starting the machine, check whether the roller cover belts become flexible to prevent nut falling down into material, whchi cause the damage accident of press roller.

5. Using wood pellet machine with clutch, before starting the diesel engine make clutch separated. After starting diesel engine, make clutch close slowly. And check tightness of leather belt often in order to prevent the phenomenon of lower output.

paradisedivingasia

Address: High and New Industrial Zone, Kexue Revenue, High and New Technology Industrial Development Zone, Zhengzhou, China