Aluminium P1020A

confirming standard BS EN 2072:2005

LME Registered Brand

 

Typical Chemical Analysis (percent)

Elements %     

Al         99.70 min

Fe        0.20 max

Si         0.10 max

Ti          0.03 max

V          0.03 max

Mn        0.03 max

Zn        0.03 max

Cu        0.03 max

Cr         0.03 max

Zr         0.03 max

B          0.03 max

Ga        0.04 max

Na        0.03 max

Others total       0.10 max

 

Technical Specification

Color                                                                silvery-white

Chisel                                                               easily cut

Magnet properties                                             non-magnetic

Density / Specific Gravity (-3 at 20 °C)        2.70

Melting Point (°C)                                              660

Specific heat at 100 °C, cal.g-1K-1 (Jkg-1K-1)     0.2241 (938)

Latent heat of fusion, cal.g-1 (kJ.kg-1)               94.7 (397.0)

Electrical conductivity at 20°C                            64.94

Thermal conductivity (cal.sec-1cm-1K-1)             0.5

Thermal emmisivity at 100°F (%)                         3.0

Reflectivity for light, tungsten filament (%)          90.0

 

Delivery as:

Ingot weighs approx. 14.5 kgs. +/-2% (68 ingots per bundle)

Ingot dimension: L670 mm x W156 mm x H70 mm

or

Ingot weighs approx. 20 kgs. +/-2% (50 ingots per bundle)

Ingot dimension: L765 mm x W154 mm x H115 mm

 

Packing: In bundles of approx. 1,000 kgs net each.