Company Index on m.ecvv.com

Quick Details

Brand Name:	XUANLI
State:	Powder Coating
Application Method:	Spray
Usage:	metal surface coating
Main Raw Material:	Epoxy
Place of Origin:	China (Mainland)
MF:	Xuanli
RAL Cards:	213 kinds of colors
PANTONE Cards:	1690 kinds of colors

Specifications

1. Our Powder Coating Advantage:

(1) Spray ratio is 90%;

(2) 1KG of powder coating can spray 8-10 square meter;

(3) Powder Coating adhesive force is stronger 8-10 years;

(4) Powder Coating is not easy to fade in 5-8 years;

2. Charactcristic: Powder

Available Powder Types Available Colors

1. Epoxy powder coating 1. RAL Colors

2. Polyester Powder Coating 2.Pantone Colors

3.Epoxy-Polyester Powder Coating( Hybrid) 3.Customer color matching

4.Polyurethane Powder Coating Available finish

5.Heat transfer printing powder coating 1. Smooth

Available gloss level 2. Rough( Sand texture )

1. High gloss( Above 80%) 3.Wrinkle( fine texture )

2. Flat gloss (50%-80%) 4.Antique( hammer tone)

3. Semi gloss(5%-50%) 5.Metallic

4. Matt ( below 5%) 6.Other special effect ( artistic)

3. How to use it?

Bad symtoms Possible Cause Solution

1.With low power, powder

coating is not easy to coated;

1. High voltage power supply shortage; 1.Check the circuit

2.Grouding is bad; 2.Remove clutter grouding line

3.Compressed air volume is too big,

the powder to blow fell &blows away;

3.Spray appropriate isolation,

reduct air convection;

4.Powder particle size is too thin;
4.Add new powder coating, reduce the

recovery powder consumption.

5.The air temperature is too high;
5.Powder particles with air water

branch of low power, control

temperature of spray area;

2. Charge repulsion powder

repboud from the working

surface;
1.The voltage is too high; 1. Lower voltage and air volume;

2.Spray gun from the work location is

too close;
2. Extend the spray gun and artifacts;

3. Grouding is bad; 3.Remove clutter grouding line;

4.Powder particle size is too thin, not

esay to attach to the workpiece surface;

4.Add new powder coating, reduce

the recovery powder consumption;

3. Corner not easy spraying

penetration is bad;
1. The powder amount is too small;
1. Lower voltage and air volume,

increasing the amount of powder;

2. Grouding is bad; 2. Adjust the spray gun position;

3. The voltage is too high; 3. Choose small backboard, proper nozzle;

4. Spray gun position is not good;
4.If the corner is more and deeper, then

consider friction gun equipment;

5. Powder spraying range is too wide;

4.Powder spraying uneven 1. Air pressure is insufficient; 1. Cleaning pipeline, spray gun and flowmeter;

2.Line fault block;
2.Check the air supply, Exclude water vapor

in powder agglomeration;

3.Block in the spray gun;
3.If powder agglomeration, to screen or

change new powder coating;

Our Powder Coating Advantage:
1.1KG of powder coating can spray 8-10 square meter;
2.Spray ratio is 95 %;
3.Powder coating adhesive force is stronger 8-10 years;
4.Powder coating is not easy to fade in 5-8 years;

Card Types Color Category

1. RAL Cards 213 kinds of colors

2. PANTONE Cards 1690 kinds of colors

3. FRD Cards 360 kinds of colors

Our service

1. We offer professional products and fast delivery.

2. We will help you solve problems when you use our products.

3. Any question can turn to the technology department of our company.

Our Product specially designed for surface decoration product such as home furniture, electrostatic appliance, industrial equipment, sports equipment, harware, shop tool rack, lamps and lanterns, computer chassics, DVD sheel, etc.

Application Area

1. Household Applications 7. Used for Security Door;

2. Car Coating 8. Radiator & Heat Sink;

3. Used for Valve 9. Corrosion Prevention of Pipes;

4. Track Traffic 10. Communications Equipments;

5. Aerospare field 11. Hardware & Brightwork;

6. Fitness Equipment 12. Zincing & Aluminium;

Application Parameter:

Item

Standards

Properties

Results

Pencil hardness

GB/T 6739

≥ H

To agree panel

Impact resistance

GB/T 1732

≥ 50 kg

To agree panel

Flexing endurance

GB/T 6742

≤ 2mm

To agree panel

Adhesive force

GB/T 9286

Grade 0

To agree panel

Bend test

GB/T 6742

2mm

To agree panel

Color difference

GB/T 9761-1988

No obvious color difference

To agree panel

Heat text

500h

>500h

Remark

1. The above test use cold-rolled steel (thickness: 0.8mm) to remove rust and oil. Suggested film thickness:   60—80 um

2. All the indicators of film features will be down lightly depending on reducing of luster.

Available Powder Types	Available Colors
1. Epoxy powder coating	1. RAL Colors
2. Polyester Powder Coating	2.Pantone Colors
3.Epoxy-Polyester Powder Coating( Hybrid)	3.Customer color matching
4.Polyurethane Powder Coating	Available finish
5.Heat transfer printing powder coating	1. Smooth
Available gloss level	2. Rough( Sand texture )
1. High gloss( Above 80%)	3.Wrinkle( fine texture )
2. Flat gloss (50%-80%)	4.Antique( hammer tone)
3. Semi gloss(5%-50%)	5.Metallic
4. Matt ( below 5%)	6.Other special effect ( artistic)

Bad symtoms	Possible Cause	Solution
1.With low power, powder coating is not easy to coated;	1. High voltage power supply shortage;	1.Check the circuit
	2.Grouding is bad;	2.Remove clutter grouding line
	3.Compressed air volume is too big, the powder to blow fell &blows away;	3.Spray appropriate isolation, reduct air convection;
	4.Powder particle size is too thin;	4.Add new powder coating, reduce the recovery powder consumption.
	5.The air temperature is too high;	5.Powder particles with air water branch of low power, control temperature of spray area;
2. Charge repulsion powder repboud from the working surface;	1.The voltage is too high;	1. Lower voltage and air volume;
	2.Spray gun from the work location is too close;	2. Extend the spray gun and artifacts;
	3. Grouding is bad;	3.Remove clutter grouding line;
	4.Powder particle size is too thin, not esay to attach to the workpiece surface;	4.Add new powder coating, reduce the recovery powder consumption;
3. Corner not easy spraying penetration is bad;	1. The powder amount is too small;	1. Lower voltage and air volume, increasing the amount of powder;
	2. Grouding is bad;	2. Adjust the spray gun position;
	3. The voltage is too high;	3. Choose small backboard, proper nozzle;
	4. Spray gun position is not good;	4.If the corner is more and deeper, then consider friction gun equipment;
	5. Powder spraying range is too wide;
4.Powder spraying uneven	1. Air pressure is insufficient;	1. Cleaning pipeline, spray gun and flowmeter;
	2.Line fault block;	2.Check the air supply, Exclude water vapor in powder agglomeration;
	3.Block in the spray gun;	3.If powder agglomeration, to screen or change new powder coating;

Card Types	Color Category
1. RAL Cards	213 kinds of colors
2. PANTONE Cards	1690 kinds of colors
3. FRD Cards	360 kinds of colors

Application Area
1. Household Applications	7. Used for Security Door;
2. Car Coating	8. Radiator & Heat Sink;
3. Used for Valve	9. Corrosion Prevention of Pipes;
4. Track Traffic	10. Communications Equipments;
5. Aerospare field	11. Hardware & Brightwork;
6. Fitness Equipment	12. Zincing & Aluminium;

Item	Standards	Properties	Results
Pencil hardness	GB/T 6739	≥ H	To agree panel
Impact resistance	GB/T 1732	≥ 50 kg	To agree panel
Flexing endurance	GB/T 6742	≤ 2mm	To agree panel
Adhesive force	GB/T 9286	Grade 0	To agree panel
Bend test	GB/T 6742	2mm	To agree panel
Color difference	GB/T 9761-1988	No obvious color difference	To agree panel
Heat text		500h	>500h
Remark	1. The above test use cold-rolled steel (thickness: 0.8mm) to remove rust and oil. Suggested film thickness: 60—80 um 2. All the indicators of film features will be down lightly depending on reducing of luster.