APEC Brand AIW series Ironworker features multiple functions, including: punching all kinds of holes (round hole, square hole, oblong hole), louver punching, steel plate punching, flat bar punching, angle steel punching, C-channel punching, H-beam punching, I-beam punching, profile steel shearing (channel shearing, I-beam shearing, round/square bar shearing, flat bar shearing, T-bar shearing, steel plate shearing, angle steel shearing), notching, press brake, angle steel notching , bending, pipe notching. It comes standard with: quick-change coupling nut & sleeve, squaring arm with scale, electronic back gauge, gauging table with stops, punching base table, safety guards and more.We can design any special tools according to your metal fabricating requirements.

APEC Brand AIW-S series is improved machine on the base of standard AIW series. It goes along with automatic holding system and temperature cooling system.

Automatic Holding System: There is automatic holding system in angle steel shearing and plate shearing work position. The holders will fix the position of work-piece, in this way, the accuracy is better and more safety for workers meanwhile save time and Improve working efficiency. 
Temperature cooling system: Once start the machine,the cooling system starts working automatically.The hydraulic oil temperature always stays at 60 degree or less.It is applicable and safety for processing in quantities and long time.

Features

1. High Quality Components & System

a. Main Electrical component: Schneider, Germany.
b. Valve: Yuken, Japan
c. Pump: Atos, Italy
d. Oil Seals: NOK, Japan
e. Timer Relay: OMRON, Japan
f. Wiring Terminal Block:WEIDMULLER, Germany
g. Motor: Weiteli, China

2. Cost Effective

AIW SERIES Hydraulic Ironworker With Very good price/performance ratio

Various AIW SERIES Hydraulic Ironworker capacity from 45T to 400T to meet your requirement.

3. Stable Performance & Reliable Quality

AIW Series Hydraulic Ironworker use hydraulic transmission. Light weight, low noise, reliable performance.

4. Simple Operation

The operation of hydraulic ironworker is controlled by foot switch.

Technical Parameters:

Technical Parameter
No.	Item		Unit	Value
1	Hole Punching	Punching Pressure	Kn	2500
		Max. Punching Thickness	mm	40
		Max. Diameter of Punching	mm	40
		Depth of Throat	mm	560
		Max. Length of Cylinder Stroke	mm	100
		Stroke Times	times/min	8-25
2	Flat-bar Shearing	Angle of Shear	degree	8°
		Max. Shearing Thickness	mm	40
		Flat Bar (W×T)	mm	450x40
				750x30
3	Angle Steel Shearing	90° Shearing of Equal Angle Steel	mm	200x200x20
		45° Shearing of Equal Angle Steel	mm	80x80x10
4	Profile Steel Shearing	Round-bar	mm	80
		Square-bar	mm	65x65
		I-beam	mm	320x130x10
		C-channel	mm	320x92x12
5	Notching	Thickness	mm	20
		Width	mm	60
		Depth	mm	100
6	Material Tensile Strength		N/mm2	450
7	Motor Power		KW	18.5
8	Overall Dimensions(L×W×H )		mm	3200x1440x2450
9	Gross Weight		Kg	12800

Note:Design and specifications subject to change without notice.

Accessories:

a. A pair of round hole punching die

b. A set of angle steel blade

c. A set of square and round bar blade

d. A set of shearing plate blade

e. A set of notching blade

The above punching and moulds will be installed in the machine.

For other dies and blades, customers need to order

Installation & Operation Training

APEC will provide you 1-7 day installation and operating training in our factory.

Training After-sales service

1. Technical documents
All labels on machines and lay-out drawings, Electrical diagram, Operation Manual, will be in English. The seller should send all necessary files to the buyer since the third week since project execution. All documents in hard copies should be also shipped with machines together.

2. Arrangement for inspection, installation and testing work
a. After all machines are delivered to customer's factory; Buyer is responsible for all preparation work, e.g. electricity supply, water supply, labors and cranes, etc.
b. The buyer will prepare for visa application for their engineers, who are responsible for guide of machine installation and testing at the Buyer's factory.
c. The Buyer will buy the round-trip air ticket for Engineer if visa application is approved. The buyer is also responsible to bear expenses generated, e.g. visa formalities, meals, accommodation and allowance of USD80 per day for each engineer.
d. Engineer will give free training lessons to labors in buyer's factory.

3. Quantity and quality guarantee
a.Quantity/Quality Discrepancy to destination port during transportation:
In case of quality/quantity discrepancy to destination port in transportation, the buyer should file claim within 30 days after the arrival of the goods at port of destination. The seller will not be responsible for any discrepancy of the goods caused by shipping company and other transportation organization and/or post office.
b.Guarantee period and after-sales services: 13 months since date of bill of lading
During this guarantee period, the seller will provide spare parts without any charge in case of quality discrepancy caused by us. If the malfunctions are caused by your incorrect operations, the seller will provide the buyer spare parts at cost price.
c.Long-term service:
The seller will charge the buyer cost price of spare parts beyond one year and provide long-term technical guide.

FAQS:

1. Payment Terms

T/T, L/C at sight are acceptable by us.

2. Price Terms

It is up to your requirement. EX-WORS, FOB, CIF, CFR and so on are acceptable  by us.

3. Delivery Time

25 working days from our accountant confirm your deposit payment.

4. Shipment Condition

We will arrange the machine production from our accountant confirm your deposit payment. The deposit is 30% of the contract. The balance should be paid up before loading machines.

5. Warranty

13 months quality guaranty for the main spare parts, not include quick-wears parts, like blade, punch, die and so on. If the parts of machines have problems, which are caused by its own quality, we will provide the accessories for free.