Automatic Coulometric Trace Moisture Analyzer is manufactured according to the requirements of the design of the provisions of the national standard GB/T7600. By Calfee Hugh titration method for the determination of trace amounts of moisture material, for insoluble in aqueous reagents and easy contamination of the electrode and reagent sample can be matched with the corresponding trace moisture were determined were determined, the whole working process of the instrument by microcomputer automatic control.


Function characteristics

1, 320 * 240 dot matrix LCD with large screen, illustrated, intuitive and friendly
2, a bar chart display signal measuring electrode, visual indication of water electrolyte
3, The change curve of real-time rendering speed on the electrolysis time, can determine whether the failure of the electrolyte according to the curve
4, the use of electrolyte, electrolyte balance point blank current compensation drift compensation to correct measurement results
5, the electrolysis current, can quickly reach the equilibrium point, into the test state
6, time stamped record, store up to 100, power down save time for 10 years
7, the thermal printer, print more beautiful and more efficient, with the offline print function
9, the introduction of the United States imported XECOM data processing chip for processing the data quickly and accurately


Technical parameters

1, measurement accuracy
a. content in 10ug ~ 1000ug, the error is less than 3UG
b. test content is greater than 1000ug, error is less than 0.3%
2, resolution: 0.1ug
3, the electrolysis current: 0 ~ 400mA
4, standby power consumption: 6W
5, size: 350 x 260 x 180mm