Features:

1  Low cost

2  High accuracy, better than ±1%

3  NIST standard

4  Noninvasive. No pipe disturbance.

   No moving parts.

   No pressure drop. No maintenance

5  Easy and economical installation.

   No pipe cutting, no tole drilling

6  Wide measurement range, 0.03~105ft/s(0.01~32m/s)

7  Wide pipe size range, 1/2"~240"(DN15~DN6000mm)

8  Suitable for all commonly used pipe materials

Technical Data:

Accuracy	Better than ±1%
Repeatability	Better than 0.2%
Principle	Transit-time measuring principle
Measurement Period	500m/s ( twice /s)
Display	LCD with backlight, display accumulated flow/heat, instantaneous flow/heat, velocity, time etc.
Signal Output	One channel standard isolation RS485 output; One channel isolation 4-20mA or 0-20mA active output; One channel OCT output(programmed between the pulse width(6-1000ms),default before leaving factory (200ms)); One channel isolation relay output,with positive,negative,net accumulation pulses and different alarm signals.
Signal Input	5 channel analog signal inputs (for signals such as temperature, pressure, liquid level,etc.)
Communication Interface	RS-232,RS-485(optional) GPRS/GSM module for networking, remote monitoring and remote  control(for model UFM-100FNB only)
Enclosure	Protection Class: IP65 / IP67 / IP68 (NEMA 4X)(optional) Explosive Proof Class: ExdⅡBT4(for model UFM-100F2B only)
Liquid Types	Virtually all commonly used liquids(full pipe)
Liquid Temp	32F~320F (0℃~160℃)
Suspension concentration	<1%, particle size smaller than 75um
Pipe Size	1"~240"(DN30~DN6000mm)
Pipe Material	All metals, most plastics, fiber glass, etc. Allow pipe liner
Power	AC: 110V/220V, or DC :8VDC-36VDC
Protocols	MODBUS, M-BUS, Fuji extended protocol and other factory protocol
Power Consumption	Less than 1.5W
Cable	Twisted Pair Line, standard length of 20m, can be extended to 500m (not recommended); Contact the manufacturer for longer cable requirement. RS-485 interface, transmission distance up to 1000m