| Model Number: | PNJ-type Rubber Lined Pump |
|---|---|
| Brand Name: | Bojin |
| Place of Origin: | China (Mainland) |
Quick Details
Specifications
Product name: PNJ-type Rubber Lined Pump
Model: PNJ type rubber lined pump
Application: Two pump the same type of structure, but different material, PNJF pump dedicated to the transport of corrosive slurry.
Product overview
PNJ type rubber lined pump Overview:
PNJ pump is single stage single suction centrifugal pump with rubber, can deliver all types of pulp pointed not contain solid particles. Transport pulp concentration does not exceed 65% of the maximum (weight), the temperature should not exceed 60°C. Two pump the same type of structure, but different material, PNJF pump dedicated to the transport of corrosive slurry.
Material: Depending on the application, PNJ pump the shaft were used high-quality carbon steel, nickel-chromium steel, respectively, wear rubber jacket, wear acid-resistant rubber and steel plate from a system, impeller made of cast steel skeleton (25PN, 25PNJF pump is made of cast iron skeleton) are wear-resistant rubber outer lining, wear acid-resistant, rubber.
PNJ type rubber lined pump parameters:
2PNJFA
2-- discharge aperture 25 in addition to
P-- impurity pump
N-- mud pump
J-- rubber lining
F-- corrosion resistant
A-- first improvement
PNJ type rubber lined pump Structure Description:
Clearance between the impeller and the sheath and between the impeller and the guard can be adjusted to maintain high efficiency operation. Expeller seal and packing form of two structures. When expeller seal structure, import perfusion height must not exceed 5m; when packing seal, shaft above the operating pressure of 1kg / cm2 to be injected
Seal type: PNJ, PNJF pump filler and expeller two different sealing structure (25PNJ, 25PNJF pump impeller seal only pay structure). Seal structure is generally available under packing. If the selection of expeller seal, it must specify when ordering. When the pump seal expeller imports perfusion height of not more than 5 m water column (25PNJ, 25PNJF pump no more than 1.5 meters of water).
Model: PNJ type rubber lined pump
Application: Two pump the same type of structure, but different material, PNJF pump dedicated to the transport of corrosive slurry.
Product overview
PNJ type rubber lined pump Overview:
PNJ pump is single stage single suction centrifugal pump with rubber, can deliver all types of pulp pointed not contain solid particles. Transport pulp concentration does not exceed 65% of the maximum (weight), the temperature should not exceed 60°C. Two pump the same type of structure, but different material, PNJF pump dedicated to the transport of corrosive slurry.
Material: Depending on the application, PNJ pump the shaft were used high-quality carbon steel, nickel-chromium steel, respectively, wear rubber jacket, wear acid-resistant rubber and steel plate from a system, impeller made of cast steel skeleton (25PN, 25PNJF pump is made of cast iron skeleton) are wear-resistant rubber outer lining, wear acid-resistant, rubber.
PNJ type rubber lined pump parameters:
2PNJFA
2-- discharge aperture 25 in addition to
P-- impurity pump
N-- mud pump
J-- rubber lining
F-- corrosion resistant
A-- first improvement
PNJ type rubber lined pump Structure Description:
Clearance between the impeller and the sheath and between the impeller and the guard can be adjusted to maintain high efficiency operation. Expeller seal and packing form of two structures. When expeller seal structure, import perfusion height must not exceed 5m; when packing seal, shaft above the operating pressure of 1kg / cm2 to be injected
Seal type: PNJ, PNJF pump filler and expeller two different sealing structure (25PNJ, 25PNJF pump impeller seal only pay structure). Seal structure is generally available under packing. If the selection of expeller seal, it must specify when ordering. When the pump seal expeller imports perfusion height of not more than 5 m water column (25PNJ, 25PNJF pump no more than 1.5 meters of water).