220KW NTA855-G1 Cummins Diesel Genset for Sale
Genset Main Technical Data

 

Generator Model	JG240GFC
Prime power	240KW
Standby power	264KW
Voltage	380V/220V
Frequency	50HZ/1500 rpm
Power factor	0.8(lag)
Governor type	Electric

 

Prime Power : Prime power is available for an unlimited number of annual hours in variable load application, in accordance with GB/T2820-97; A 10% overload capability is available for a period of 1 hour within a 12-hour period of operation.

 

Standby Power Rating : The standby power rating is applicable for supplying emergency power for the duration of a utility power interruption. No overload, utility parallel or negotiated outage operation capability is available at this rating.

 

Reliable Performance

Voltage regulation

Voltage regulation maintained within ±0.5% as follow:

● Power factor Between 0.8～1.0 lag

● From no load to full load, any steady load

● Speed droop variation under 4.5%

 

Frequency/Speed undulation

● Change load from 0-100%, Frequency/Speed Droop Ratio within 5%

● Load from 25-100%, any steady load Frequency/Speed undulation within 0.25%

Effect factor of telecom

● Telephone Influence Factor (TIF) : Less than 50

                           THF : Less than 2%

Certificate 

● ISO8528, GB/T2820

● EN12601:2001, EN60034-22:1997, EN60204-1:2006

● ISO9001:2008 Quality Control System

Dimension and Weight

Open Type

Overall size (L*W*H)

2950*1050*1750

Weight: 2600kg

Technical Data

Engine Model	NTA855-G1A
Configuration	4 cycle , 6 cylinders in line
Aspiration	Turbocharged after water-cooled
Bore×Stroke	140 x152 mm
Rated speed	1500rpm
Displacement	14.0L
Compression Ratio	15:1
Prime Power	261KW
Speed Governor	electrical
Cooling System	Water-cooled , 40℃ Radiator As Standard, 50℃ Is Optional.
Speed Stability (%)	≤5%
Fuel Consumption at 100% Load	201g/kw.h
Starter Motor	DC24V,

Alternator SPECIFICATION

Technical Data

Brand	MARATHON
Alternator Model	MP-240-4
Capacity	240KW
Voltage	220/380V
Frequency & Speed	50HZ/1500RPM
Exciter type	Brushless, Self-excited
Power factor	0.8
Voltage Adjust range	≥5%
Voltage Regulation NL-FL	≤±0.5%
Insulation Grade	H
Protection Grade	IP23

Control System 

1. Standard: HGM180HC Key Start

Providing the standard functions as follows:

(Also can be made according to the customers' special requirements)

＊Start/Stop controller

＊Ampere meter

＊Voltmeter and selector switch

＊Frequency meter/ Water temperature gauge/ Oil pressure gauge/ Hour counter/ Battery voltage meter

＊Emergency stop pushbutton

＊Alarm System: Over speed, High Engine Temperature

Low Oil Pressure, Charge Fail

＊Protection System: Over speed, High Engine Temperature, Low Oil Pressure, Emergency Stop. And the other protection function pre-setting

 

2. Option: Smartgen HGM6110 Digital Auto Start

 

3. Option: Smartgen HGM6120 Digital Auto Start

   (Option assembled with the ATS)

 

4. Option: Deep Sea DSE5210 Digital Auto Start      

 

5. Option: Deep Sea DSE5220 Digital Auto Start

   (Option assembled with the ATS) 

Digital Auto-start Generator controller integrating digital, intelligent and network techniques is used for automatic control system of diesel generator. It can carry out functions including automatic start/stop, data measure and alarming. Optionally assembled with the ATS, it can carry out auto-switching between the outer power and generating set power. (AMF)

Functions:

＊Automatic Start/Stop

＊3 start attempts failure and Automatic Crank Disconnect               

＊Parameters display (V/A/Hz/Hour)

＊Engine monitoring and protection

＊Charge alternator exciting and Charge alternator fail alarm

＊Running hour counting

＊Settings can be adjustable via key buttons on front panel