100KW Trailer Diesel Generator

STANDARD SPECIFICATION

●   Coupled with Cummins diesel engine and Stamford

    Or Marathon alternator

●   24V DC start motor and storage battery

●   Brushless, Self-excited, IP23, insulation class H alternator

●   40℃ radiator as standard, 50℃ is optional

●   Key start panel control system as standard, digital auto-start panel is optional

●   Optional open type or silent type

●   All generator sets are gone through rigorous testing before being released to the market place, including 50% load, 75% load, 100% load , 110% load and all protection function (overspeed stop, high water temperature, low oil pressure, battery charging fail, emergency stop)

General feature

Genset Main Technical Data

Generator Model	JGC100GF
Output power	100KW
Voltage	380V/220V
Frequency	50HZ/1500 rpm
Power factor	0.8(lag)
Governor type	Electric

Reliable Performance

Voltage regulation

Voltage regulation maintained within ±0.5% as follow:

● Power factor Between 0.8～1.0 lag

● From no load to full load, any steady load

● Speed droop variation under 4.5%

 Frequency/Speed undulation

● Change load from 0-100%, Frequency/Speed Droop Ratio within 5%

● Load from 25-100%, any steady load Frequency/Speed undulation within 0.25%

Effect factor of telecom

● Telephone Influence Factor (TIF) : Less than 50

                           THF : Less than 2%

Certificate

● ISO8528, GB/T2820

● EN12601:2001, EN60034-22:1997, EN60204-1:2006

● ISO9001:2008 Quality Control System
Dimension and Weight

Open Type

Overall size (L*W*H)

2150*750*1200

Weight: 1050kg

ENGINE SPECIFICATION

Cummins Diesel Engine

Technical Data

Engine Model	6BTA5.9-G2
Configuration	4 cycle , 6 cylinders in line
Aspiration	Turbocharged after water-cooled
Bore×Stroke	102 x120 mm
Rated speed	1500rpm
Displacement	5.9 L
Compression Ratio	17.5:1
Prime Power	100KW
Speed Governor	electrical
Cooling System	Water-cooled , 40℃ Radiator As Standard, 50℃ Is Optional.
Speed Stability (%)	≤5%
Fuel Consumption at 100% Load	211g/kw.h
Starter Motor	DC24V,

Alternator Specification

Technical Data

Brand	MARATHON
Alternator Model	MP-104-4
Capacity	104KW
Voltage	220/380V
Frequency & Speed	50HZ/1500RPM
Exciter type	Brushless, Self-excited
Power factor	0.8
Voltage Adjust range	≥5%
Voltage Regulation NL-FL	≤±0.5%
Insulation Grade	H
Protection Grade	IP23

 Control System

1. Standard: HGM180HC Key Start

Providing the standard functions as follows:

(Also can be made according to the customers' special requirements)

＊Start/Stop controller

＊Ampere meter

＊Voltmeter and selector switch

＊Frequency meter/ Water temperature gauge/ Oil pressure gauge/ Hour counter/ Battery voltage meter

＊Emergency stop pushbutton

＊Alarm System: Over speed, High Engine Temperature

Low Oil Pressure, Charge Fail

＊Protection System: Over speed, High Engine Temperature, Low Oil Pressure, Emergency Stop. And the other protection function pre-setting

2. Option: Smartgen HGM6110 Digital Auto Start

3. Option: Smartgen HGM6120 Digital Auto Start

   (Option assembled with the ATS)

4. Option: Deep Sea DSE5210 Digital Auto Start       

5. Option: Deep Sea DSE5220 Digital Auto Start

   (Option assembled with the ATS) 

Digital Auto-start Generator controller integrating digital, intelligent and network techniques is used for automatic control system of diesel generator. It can carry out functions including automatic start/stop, data measure and alarming. Optionally assembled with the ATS, it can carry out auto-switching between the outer power and generating setpower. (AMF)

Functions:

＊Automatic Start/Stop

＊3 start attempts failure and Automatic Crank Disconnect               

＊Parameters display (V/A/Hz/Hour)

＊Engine monitoring and protection

＊Charge alternator exciting and Charge alternator fail alarm

＊Running hour countin

＊Settings can be adjustable via key buttons on front panel