30W 600/700/800/900mA DALI/0-10V Constant Current LED Dimmable Driver EUP30AD-1HMC-0
EUP30AD-1HMC-0 is a wide input voltage, constant current mode output LED driver. The output current can be easily set via the DIP dial switch. EUP30AD-1HMC-0 complies with DALI standard protocol IEC 62386,and provides multiple dimming function (DALI,0-10V active signal ,PWM, adjustable resistance, and Touch DIM) to achieve a smooth dimming effect.
Feature
1. Single channel output, output current level selectable by DIP S.W.
2. Support a variety of dimming mode(DALI/0-10V active signal/adjustable resistance/PWM/Touch DIM)
3. High range of input voltage 200VAC ~ 240VAC
4. High efficiency up to 83%
5. Built-in active PFC function
6. Dimming effect smooth, no flicker
7. Protections: over load, short circuit
8. Suitable for indoor LED lighting application, such as down light, panel light, and so on
Technical Parameter
Model: EUP30AD-1HMC-0
Output Current: 600/700/800/900mA
Output Voltage: 3-50VDC/3-43VDC/3-37VDC/3-34VDC
Power: 30W
Current Accuracy: ±3%
Maximum Output Voltage: 58VDC
Output LF Current Ripple(< 120 Hz): ＜3%
Channels: 1
Input Voltage: 200~240VAC
Frequency: 50/60Hz
Power Factor(Type): ≥0.9@230V,full load
Efficiency(Type): 83%@230V,full load
Input Current: 0.2Amax@230VAC
Inrush Current: 20A@230VAC
Protection: Short circuit, close output, recovers automatically after fault removed;Over load,above 110%-150% of rated output power, constant voltage limiting
Dimming: DALI/1-10V active signal/adjustable resistance/PWM/Touch DIM
Priority order: DALI>(1-10V active signal/adjustable resistance/PWM)> Touch DIM
Dimension: 150*43*29 mm(L*W*H)
G.W.: 150g
Working temp.: -20℃ ~ 40℃
Relative humidity: 20~90% RH