20W 300/500/700mA DALI & 0-10V led driver constant current EUP20AD-1WMC-0
Constant current LED driver EUP20AD-1WMC-0 is a wide input voltage, constant current mode output LED driver. The output current can be easily set via the DIP dial switch. EUP20AD-1WMC-0 complies with DALI standard protocol IEC 62386,and provides multiple dimming function (DALI,0-10V active signal ,PWM, adjustable resistance, and Touch DIM) to achieve a smooth dimming effect.
Feature
1. Single channel output, output current level selectable by DIP S.W.
2. Support a variety of dimming mode(DALI/0-10V active signal/adjustable resistance/PWM/Touch DIM)
3. Wide range of input voltage 100VAC ~ 240VAC
4. High efficiency up to 83%
5. Built-in active PFC function
6. Dimming effect smooth, no flicker
7. Protections: Short circuit.
8. Suitable for indoor LED lighting application, such as down light, panel light, and so on
Technical Parameter
Model: EUP20AD-1WMC-0
Output Current: 300/500/700mA
Output Voltage: 9-40/9-40/9-28VDC
Power: 20W
Current Accuracy: ±5%
Maximum Output Voltage: 50VDC
Output LF Current Ripple(< 120 Hz): ＜3%
Channels: 1
Input Voltage: 100~240VAC
Frequency: 50/60Hz
Power Factor(Type): ≥0.9@230V,full load
Efficiency(Type): 83%@230V,full load
Input Current: 0.11Amax@230VAC
Inrush Current: 15A@230VAC
Protection: Short circuit, Close output, recovers automatically after fault removed
Dimming: DALI/1-10V active signal/adjustable resistance/PWM/Touch DIM
Priority order: DALI>(1-10V active signal/adjustable resistance/PWM)> Touch DIM
Dimension: 150*43*29 mm(L*W*H)
G.W.: 130g
Working temp.: -20℃ ~ 40℃
Relative humidity: 20~90% RH