20W 300/500/700mA 2.4G wireless dimming constant current led driver EUP20R-1WMC-0

EUP20R-1WMC-0 is a constant current mode output LED driver. The output current can be easily set via the DIP dial switch. This driver could be controlled by the 2.4G remote RC14 or RC11 to dim lightings. Each driver could at the same time be matched and controlled by 10 remotes, and one remote can match unlimited drivers.

Feature
1. Single channel output, output current level selectable by DIP S.W
2. Using 2.4GHz RF remote control
3. Wide range of input voltage 100VAC ~ 240VAC
4. High efficiency up to 83%
5. Built-in active PFC function
6. Dimming effect smooth, no flicker
7. Protections: Short circuit.
8. Suitable for indoor LED lighting application, such as down light, panel light, and so on

Technical Parameter
Model: EUP20R-1WMC-0
Output Current: 300/500/700mA
Output Voltage: 9-40/9-40/9-28VDC
Power: 20W
Current accuracy: ±5%
Maximum output voltage: 50VDC
Output LF current ripple(< 120 Hz): ＜3%
Channels: 1
Input Voltage: 100–240VAC
Frequency: 50/60Hz
Power factor: ≥0.9@230VAC,full load
Efficiency: 83%@230VAC,full load
Input Current: 0.11Amax@230VAC
Inrush current: 15A@230VAC
Protection: Short Circuit, Close output, recovers automatically after fault removed
Dimming: 2.4GHz RF remote control
Optional remote control: RC14,RC11
Dimension: 150*43*29 mm(L*W*H)
G.W.: 120g
Working temp.: -20℃ ~ 40℃
Relative humidity: 20~90% RH