40W 12VDC 2.4G wireless dimming constant voltage led driver EUP40R-1W12V-0
EUP40R-1W12V-0 is a constant voltage mode output LED driver. This driver could be controlled by the 2.4G remote RC14 or RC11 to dim lightings. Each driver could at the same time be matched and controlled by 10 remotes, and one remote can match unlimited drivers.
Feature
1. Single channel constant voltage output,12V
2. Using 2.4GHz RF remote control
3. Wide range of input voltage 100VAC ~ 240VAC
4. High efficiency up to 86%
5. Dimming effect smooth, no flicker
6. Over load protection ,short circuit protection
7. Suitable for indoor LED lighting application
Technical Parameter
Model: EUP40R-1W12V-0
Output Voltage: 12VDC
Output Current: 3.4A
Power: 40W
Voltage accuracy: ±5%
R & N (Max): 120mVp-p
Channels: 1
Input Voltage: 100–240VAC
Frequency: 50/60Hz
Power factor: ≥0.5@230VAC,full load
Efficiency: 86%@230VAC,full load
Input Current: 0.4Amax@230VAC
Inrush current: Cold start 45A(twidth=14us measured at 50% Ipeak) @230VAC
Protection: Short Circuit,Close the output, restart to recover since fault condition is removed for 10s; Over Load, hiccup mode, recovers after fault condition is removed
Dimming: 2.4GHz RF remote control
Optional remote control: RC14,RC11
Dimension: 137*82*31 mm(L*W*H)
G.W.: 245g
Working temp.: -20℃ ~ 40℃
Relative humidity: 20~90% RH