| Alloy Or Not: | Non-alloy |
|---|---|
| Special Pipe: | API Pipe |
| Surface Treatment: | 3PE , 2 PE, EPOXY |
| Certification: | API |
| Technique: | SAW |
| Application: | Oil Pipe |
| Secondary Or Not: | Non-secondary |
| Place of Origin: | China (Mainland) |
| Section Shape: | Round |
| Outer Diameter: | 219.1-3048 mm |
| Thickness: | 5-30 mm |
| Grade: | 10#-45#,10Cr9Mo1VNb,15NiCuMoNb5 |
| Grade: | 20#,10Cr9Mo1VNb,15NiCuMoNb5 |
| Standard: | API,ASTM,BS |
| Standard: | API 5CT,API 5L,ASTM A252-1998,ASTM A53-2007,ASTM A53M-2007,BS 1139 |
| Standard:: | API, ASTM, BS, API 5L, |
| Grade: | 10#-45#, 10Cr9Mo1VNb, |
| Thickness: | 5-30mm |
| Surface Treatment:: | Black painting, varnish paint, anti rust oil, hot galvanized, cold galvanized, 3PE |
| Technique: | SAW |
| Length:: | 12m |
Quick Details
Specifications
SSAW Steel Pipe
Process: Spiral Submerged- Arc Welded Steel Pipe
Usage: Used for low pressure liquid delivery, such as water, gas, and oil; construction and piling
Standard: API 5L, API 5CT, ASTM A252, ASTM 53, EN10217, EN10219, BS 5950, ASTM A572 , JIS, IS,
Certificate: EN10217, EN10219, API 5L PSL1/ PSL2, API 5CT
Out Diameter: 219.1mm –3048mm
Wall Thickness: 5.0mm-30mm
Length: Up to 70m
Steel Grade:
API 5L: GR A, GR B, X42,X46, X56, X60,X65,X70
ASTM A252 GR 1, GR 2, GR 3
ASTM A53: GR A, GR B, GR C, GR D
BS 4360: Grade 43, Grade 50
EN: S275, S275JR, S355JRH, S355J2H
Surface: Fusion bond Epoxy coating, Coal Tar Epoxy, 3PE, Vanish Coating, Bitumen Coating, Black Oil coating as per customer's requirement
Test: Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength, Yield strength, Elongation), Technical Properties (Flattening Test, Bending Test, Blow Test, Impact Test), Exterior Size Inspection, Hydrostatic Test, X-ray Test.
Mill Test Certificate: EN 10204/3.1B
Wall Thickness
ASTM A252 Piling Pipe
ASTM A252 Piling Pipe
STEEL GRADE
ASTM A252 GR 1, GR 2, GR 3
STEEL CHEMICAL COMPOSITION
The steel shall conform to the following requirements as to chemical composition:
Phosphorus, maximum (%) : 0.050
MECHANICAL PROPERTIES
|
STEEL GRADE
|
Yield strength, min. psi (MPa)
|
Tensil strength, min. psi (MPa)
|
Elongation in 2 in., min. %
|
|
|
GRADE 1
|
30,000 (205)
|
50,000 (345)
|
30%
|
|
|
GRADE 2
|
35,000 (240)
|
60,000 (415)
|
25%
|
|
|
GRADE 3
|
45,000 (310)
|
66,000 (455)
|
20%
|
|
TEST REQUIRED
Chemical Analysis, Mechanical Test, Visusal Inspection , Tension Test, Dimension Check
EN10219 Structure Pipe
EN10219 Struture Pipe
STEEL GRADE
EN10219 S235, S275, S355,etc
STEEL CHEMICAL COMPOSITION