1.Brief Introduction:

PP meltblown filter made of polypropylene melt tangles made of microfiber, does not apply to any chemical adhesives, fiber in the space of random self-adhesive form three-dimensional microporous structure, fabrics and surfaces. Deep. Rough and integration, the fiber and density form high filtration precision and assimilative capacity in the diameter direction of the filter, the pressure is small, dense outer sparse gradient pore depth filtration structure, dirt holding capacity, it can effectively out of the stream of liquid suspended solids, particulates, rust and other impurities, high filtration efficiency, strong life.

  

 

2.Techincal parameters:

 

Item		Specifications
Filter fineness		1μm,5μm,10μm,20μm,30μm, 50μm,75μm,100μm
Filter length		10",20",30",40"
Core diameter		Φ55mm,φ63mm,φ65mm
Filter inside		φ28mm
Maximum resistance  temperature	Polypropylene	60°C
	Degreasing cotton	120°C
Maximum pressure		1.0MPa@25°C
Positive pressure differential		0.4MPa@25°C
Negative pressure differential		0.1MPa@25°C
Connection Type		Surface pressure
Material attached		Polypropylene

  

 

3.Performance features:

1.Low operating pressure for hole/slot on the surface 
2.  Superior dirt holding capacity for the high or Grades density design 
3.  High corrosion resistant of chemical solution 
4.  Easy to replace for Uniform size  
5.  Low costs of system performance & Consistent quality