Feeding mode: the wefts are straightened, cut and then bent on a bending machine to finish an ideal radian; the wefts are
Straightened, cut and sequentially placed at corresponding positions of a wire placement mold frame.
Welding: the servo motor controls an automatic feeding process to finish welding, and the grids are uniform; pneumatic
Pressurization is adopted, and welding spots are firm; mesh openings, welding pressure and other welding parameters can
Be adjusted only by direct input on a touch screen.
Welding finish: meshes are automatically drawn by a stepper motor.
Technical parameters
Wire diameter |
4-8mm |
Rated voltage |
AC380V |
Weft distance |
Min50mm |
Warp mode |
Pre-shearing and pre-bending |
Warp distance |
100-300mm |
Weft mode |
Pre-shearing |
Welding width |
2000mm |
Welding sport quantity |
21 |
Welding speed |
40times/min |
Dimensions |
12.5*2.5*1.9(m) |
Technical parameters
Wire diameter |
4-8mm |
Rated voltage |
AC380V |
Weft distance |
Min50mm |
Warp mode |
Pre-shearing and pre-bending |
Warp distance |
100-300mm |
Weft mode |
Pre-shearing |
Welding width |
2000mm |
Welding sport quantity |
21 |
Welding speed |
40times/min |
Dimensions |
12.5*2.5*1.9(m) |