Peak Repetitive Reverse Voltage: | 1000 |
---|---|
Package Type: | Throught Hole |
Application: | Inverter / Converter |
Type: | Bridge Rectifier |
Brand Name: | SPS |
Mean On-State Current: | 50 |
Model Number: | S50VB100 |
Place of Origin: | China (Mainland) |
Quick Details
Specifications
Special Sun AHM Technology(Shanghai)Co.,Ltd.
SPS - ISO Factory for SMD and through-hole Diodes and Rectifiers since 2000
SVB package 50A bridge rectifier S50VB100/S50VB80/S50VB60/S50VB40 suitable for electric tools, hydraulic lifting device solutions
Square bridge silicon bridge stack S25VB100, S35VB100, S50VB100
Large chip S15/S25/S35/S50VB100 50A 1000V welding machine rectifier bridge stack
Application areas: electric welding machine, induction cooker, power supply......
Electric welding machine rectifier bridge, S15/S25/S35/S50VB100, brand new original authentic, 15A/25A/35A/50A 1000V, quality assurance!
Detection method:
the single-phase bridge rectifier stack is a rectifier assembly packaged together by 4 rectifier diodes in a full-wave rectifier circuit connection mode;
the way to judge the bridge stack is to measure the forward and reverse resistance of 4 diodes with a multimeter;
If the measured forward resistance of the diode is infinite, it means that the internal circuit of the diode is open;
If the measured reverse resistance of the diode is close to zero, it indicates that the diode has broken down;
Output voltage theory:
1. in the single-phase bridge rectifier circuit, if a filter capacitor is connected, when the load is open, the output voltage (that is, the voltage across the capacitor) is the peak value of the AC input voltage, that is: U output=1.414*U Input, that is, root 2 times the input voltage.
this conclusion is applicable to bridge, full-wave, and half-wave rectifier circuits.
but under load, it is generally designed to be 1.2 times U input. the larger the filter capacitor, the higher the output voltage, and vice versa.
2. in the single-phase bridge rectifier circuit, if there is no filter capacitor, when the load is open, the output voltage is 0.9 times the AC input voltage, that is: U output = 0.9 * U input.
When loaded, the formula remains the same, still: U output = 0.9 * U input. this bridge stack is suitable for circuits within 700V. 5V, 12V, 24V, 36V, 48V, 72V-220V, 380V, are all available!
Check the best offer with SPS, a professional factory of diode rectifiers, bridge rectifiers, transistors etc.