UKREXPORT paves direct access to Ukrainian production of commercial or thin (THN) Steel Sheets & Coils, cold-rolled in limited Number of grades and dimensions. Thickness to be within 0.5-2.0mm, width within 1,000-1,500mm, length within 2,000-3,500mm or else length in coils specified by Buyers. Common and specific characteristics include 1) sheets of quality and Ordinary carbon steel for general purposes; 2) sheets of high-strength steel; 3) sheets of low-carbon steel for cold stamping; 4) sheets of low carbon steel for enameled ware.

Manufactured according to domestic standards only:

-- ST1-3 SP

-- ST1-3 KP(PS)

-- 10, 15, 20 KP(PS)

-- 08-20 KP(PS), 08IO OCB

-- 09G2B, 14G2B, 09G2C, 10 XHDP

Regulated by general State Standards DSTU 2834-94 (including GOST 16523-97, GOST 9045-93, GOST 19904-90, GOST 17066, GOST 24244, GOST 19281-89) And rolled into groups of dimensions preceding from thickness/width variation:

0.51000-1050mm; length 2000-2500(3500)mm
0.61000-1220mm; length 2000-2500(3500)mm
0.65-0.71000-1250mm; length 2000-2500(3500)mm
0.65-1.01000-1250mm; length 2000-2500(3500)mm
0.8-0.91000-1360mm; length 2000-2500(3500)mm
0.8-1.01000-1360mm; length 2000-2500(3500)mm
1.0-1.51000-1400mm; length 2000-2500(3500)mm
1.0-2.01000-1500mm; length 2000-2500(3500)mm

Minimal order quantity is 1,000mt because this is minimal capacity of a single Blast furnace where requested steel grade for requested Steel Sheet or Coil is to be smelted. It is often delivered in 20ft/40ft containers, since bulk Vessels don't always have decks good for placing bundles of Flat Steel. Please Note, any original production of CR Sheets/Coils is factory approvable but not Publicly accessible process. True inquiry for particular production/offer/price Has to show authentic information: 1) who (what company) is Buyer/importer/consignee; 2) where (what bank) his payment is to come from; 3) How (in copies of docs) he bought/imported/consumed CR Steel last time, to prove 1) and 2).