UKREXPORT paves direct access to Ukrainian production of commercial or thin (THN) Steel Sheets & Coils, hot-rolled in relative variety of grades and dimensions. Thickness to be within 1.5-8.0mm, width within 1,000-1,500mm, length within 2,000-12,000mm or else length in coils specified by buyers. Common and specific characteristics include 1) plates and sheets of ordinary Carbon steel for general purposes; 2) plates of quality carbon steel for General purposes; 3) plates of high quality structural steel for cold stamping; 4) plates withIncreased strength; 5) sheetsof Structural low-alloyed steel; 6) sheets and wide strips of structural quality Steel.

Manufactured according to domestic and partially international standards as Following:

-- ST0-6 SP

-- ST0-6, 10 KP(PS)
--07-08 GYUT

-- 08-20 KP(PS), 25PS

-- 09G2, 09G2D, 09G2

-- S235JR, S235JRG1, S235JRG2, S275JR

 

Regulated by general State Standards DSTU 2834-94 (including GOST 4041-71, GOST 19903-74, GOST 17066-80, GOST 14637-89, GOST 19281-89, GOST 1577-93, GOST 16523-97) and specific Technical Conditions TU U 14-4-426-98, TU U 14-4-458-99, TU U 14-16-56-2000, TU U 27.1-4-516-2002, TU U 27.1-00193714-182-2004, TU U 27.1-23365425-621:2007; and rolled into groups of Dimensions preceding from thickness/width variation:

1.5970-1030mm; Length 2000-6000(12000)mm
1.8970-1100mm; Length 2000-6000(12000)mm

1.91000-1250mm; length 2000-6000(12000)mm

2.0-2.51000-1250mm; length 2000-6000(12000)mm

2.6-2.91000-1360mm; length 2000-6000(12000)mm

3.0-3.91000-1500mm; length 2000-6000(12000)mm

4.0-6.01000-1500mm; length 2000-6000(12000)mm

6.1-8.01000-1500mm; length 2000-6000(12000)mm

Minimal order quantity is 1,000mt because this is minimal capacity of a single Blast furnace where requested steel grade for requested Steel Sheet or Coil is to be smelted. It is often delivered in 20ft/40ft containers, since bulk Vessels don't always have decks good for placing bundles of Flat Steel. Please Note, any original production of HR Sheets/Coils is factory approvable but not Publicly accessible process. True inquiry for particular production/offer/price Has to show authentic information: 1) who (what company) is Buyer/importer/consignee; 2) where (what bank) his payment is to come from; 3) How (in copies of docs) he bought/imported/consumed HR Steel last time, to Prove 1) and 2).