Tengzhou Star smith Metal Products Co., Ltd. (SDS)Is one of the top three  specializing in steel fiber production in China and has participated in the construction of national projects several times. Established in 2011, we can provide an annual production scale of up to 10,000 tons of steel fiber for concrete. It mainly produces glued steel fiber, copper-coated micro steel fiber and loose steel fibers.

 

the  for concrete reinforcement is a new kind of metal material, in order to enhance concrete and shotcrete in its hardened state. Tengzhou SDS steel fibers make concrete have extremely high flexural strength and shear strength, and have good toughness, crack resistance, earthquake resistance, seepage control and other functions. Widely used in industrial factory floor, highway, high-speed rail, bridge, airport, tunnel, water conservancy, electric power, municipal engineering, etc. The company has passed ISO9001 certification, and its products are exported to Southeast Asia, Europe, America and etc.

 

the Benefits of  

 

for the same mixing and construction, there is no need to add equipment or increase the construction cost.

under the same strength requirement, it can replace steel mesh and reduce the pouring thickness of concrete by 15-25%.

Improve the construction conditions, mixing vehicles and construction personnel can reach the site directly, and shorten the construction period by 30%. Steel fiber reinforced concrete has high tensile strength, which can prolong the distance between contraction joints and facilitate continuous and rapid pouring of concrete.

Convenient construction, saving labor, greatly shortening the construction period and saving the total project cost.

the Working Principle of hooked end steel fibres 

Fibers reinforce in three dimensions throughout the entire concrete matrix. Fiber performance is based on the combination of the tensile strength, aspect ratio(length/diameter) and anchorage. the distributed fibers restrain micro-cracking and redistribute accumulated stress caused by applied loads and shrinkage. the sooner the crack is intercepted and its growth is inhibited, the less chance the crack will occur.