Flexible Graphite gasket, pure graphite gasket JT-F6100

Flexible Graphite gasket, also known as expanded graphite gasket, is made by punching or Cutting expanded graphite coil or plate. Expanded graphite does not contain Binder and filler, so it has high purity, good corrosion resistance, high / low Temperature resistance, good compression resilience and high strength. It is Suitable for sealing low-pressure parts and can prevent electrochemical Corrosion between graphite and flange. the flexible graphite gasket can be made into various round and complex geometric gaskets. the flexible graphite gasket Can also be made into the form of edge wrapping in the inner and outer rings, Which is easy to install, disassemble and not easy to be damaged. It is widely used In the sealing of pipes, valves, pumps, pressure vessels, heat exchangers, Condensers, generators, air compressors, exhaust pipes, refrigerators, etc. the Maximum processing size: ~ 1500mm; special specifications Grid or various Non-standard products can be formulated according to customer requirements.

[flexible Graphite gasket] technical parameters:

Project	Company	Numerical Value
Density Tolerance	g/cm3	-0.06~+0.06
Thickness Tolerance	mm	-0.04~+0.04
Carbon Content	%	99
Tensile Strength	MPa	4.5
Compression Ratio	%	>40
Rebound Rate	%	>10
Sulfur Content	ppm	<1000
Chlorine Content	ppm	<45
Temperature	°C	-200~+600