Normally closed solenoid Valve for steam. High rate of flow low power consumption, investment cast body. The inner design of valve is double acting plunger and plunger is in Teflon. Body material: Brass, stainless steel Orifice:2.5-50 mm Pipe connection:1/4-2 (inch) Cv rating: 0.23-48 Fluid temp. : 5C - 180C (200C) Operating pressure:0-25 Bar Diaphragm material: Teflon SPECIFICATIONS 2/2 way model, normally closed, Brass Body. Best suited installed horizontal and the coil vertical for long life Standard Voltage: 110V/240V/24Vac,12V/24Vdc DIN PLUG COIL AVAILABLE Other special AC/DC voltage also can be made . Operation Voltage Variation: 10% Fluid temperature is less than 120 . the coil is water proof If more than 120 , the coil is high temperature-resistant type. CHARACTERISTICS High rate of flow low power consumption, investment cast body. The inner design of valve is double acting plunger and plunger is in Teflon which can resist high pressure, high temperature and high frequency actuation. NOT SUITED FOR Fluid viscosity above 50CST Or fluid which are liquid when heated, and solid when cooled Caustic fluid