Parameters of Spray Booth YK-600 1. Body OD dimensions 7000mm*5400mm*3450mm 2. Body ID dimensions 6900mm*3900mm*2700mm 3. Entrance gate: 3-fold, 3000mm*2650mm, Personal door: 1-fold, 800mm*2000mm; Aluminum alloy door frame 4. Wall Panels: EPS with double-ply plate, tongue and groove construction, thickness: 50mm. 5. Basement & Floor: adjust height bolt and complete steel, 3pcs of ramp, 900*2000mm (W*L)/pc, and with inclined ramp. 6. Intake air fan: 1 double-intake centrifugal fans, 7.5KW motor, air capacity: 25000m3/h. 7. Exhaust air fan: 1 double-intake centrifugal fan, 7.5KW motor, air capacity: 25000m3/h. 8. Full load room wind speed (m/s): 0.3-0.45 9. Air exchanging times (times/H): 330 10. Heating system: RIELLO RG5S oil burner, heat productivity: 200000Kcal/h, stainless steel heat exchanger, highest temperature: 80 degree, 1 electric damper from spraying to baking cycle. 11. Temperature rise time min (20-80) 5-6 12. Lighting: ceiling light: 40pcs*30W, Philip lamp, open from outside; side light: 40pcs*20W, Philip lamp; luminance 800LUX, Pak lighting rectifier. 13. Filter system: pre-filter, high efficiency filter (ceiling filter), floor filter, exhaust activated carbon filter. 14. Control system: spraying, risen-temperature spraying, baking temperature time setting, lighting switch, hour meter, pressure gauge, emergency stop, failure alarm, temperature controller. * Note: We are also capable of producing nonstandard products by order of customer. If the real objects disaccord to the materials, please refer to the real object finally. Any technical improvements to the product, we will not give a further notice.