Parameters of Spray Booth YK-800 1. Body OD dimensions 7100mm*5550mm*3600mm 2. Body ID dimensions 7000mm*4000mm*2800mm 3. Entrance gate: 3-fold, 3000mm*2700mm, Personal door: 1-fold, 800mm*2000mm; Aluminum alloy door frame 4. Wall Panels: rock wool, tongue and groove interlock construction, thickness: 50mm. 5. Basement & Floor: adjust height bolt and complete steel, 3pcs of ramp, 900*2000mm (W*L)/pc. 6. Intake air fan: 1 turbo fans, 7.5KW motor, direct drive, air capacity: 25000m3/h. 7. Exhaust air fan: 1 turbo fan, 7.5KW motor, direct drive, air capacity: 25000m3/h. 8. Full load room wind speed (m/s): 0.3-0.4 9. Air exchanging times (times/H): 330 10. Heating system: RIELLO RG5S oil burner, heat productivity: 200000Kcal/h, stainless steel heat exchanger, highest temperature: 80 degree, 1 electric damper from spraying to baking cycle. 11. Temperature rise time min (20-80) 5-6 12. Lighting: Upper inclined lights, 8 unitsx4Pcs=32Pcs, 58W Philip tube; Lower lights: 10units*2Pcs=20Pcs, 20W tube (horizontal installation), OSRAM rectifier, luminance 800LUX. 13. Filter system: pre-filter, high efficiency filter (ceiling filter), floor filter, exhaust air filter. 14. Control system: spraying, risen-temperature spraying, baking temperature time setting, lighting switch, hour meter, pressure gauge, emergency stop, failure alarm, temperature controller. * Note: We are also capable of producing nonstandard products by order of customer. If the real objects disaccord to the materials, please refer to the real object finally. Any technical improvements to the product, we will not give a further notice.